Top-rated woodworkers.

Get matched with top woodworkers in Roanoke, VA

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Roanoke, VA?

Select your specific project to find the pro for you.

Find Woodworkers in Roanoke

Mighty Dad Flooring & Home Repair
4.8(
78
)
Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+7 more

Serving Roanoke, VA and surrounding areas

Approved

In business since 2009

Free estimates

Emergency services offered

"We hired Mighty Dad in late spring/early summer of 2020 to do the construction part of a deck remodeling job (plus the last not-insignificant demolition step that we didn't finish). He replaced the old weathered wood planking with composite material and railing, and worked around some challenging deficiencies in the original underlying deck frame so we wouldn't have to completely replace the entire structure at much higher cost. Jeff worked around our schedule and kept us apprised of any questions or unexpected things that came up. We're totally happy with the end result, and it should last for many enjoyable years with almost no maintenance!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Bathroom Before

+6

Response time2 days
Response rate100%
Recommended by93%of homeowners
Avatar for All In One Home Solutions, LLC
All In One Home Solutions, LLC
3.2(
77
)
Gazebo or Freestanding Porch - Repair

Serving Roanoke, VA and surrounding areas

Approved

In business since 2010

Free estimates

Emergency services offered

"Excellent work, pleasant to work with. they cleaned and coated my 120 year old tin roof. The only delay was they were shorted materials by their vendor. I don't blame them, but whole-heartedly recommend them for any roofing needs."
Masonry Steps Before
Roof Replacement
Masonry Step and Walk Replacement
Roof Replacement
Masonry Steps Before

+50

5 neighbors recently requested a quote
Recommended by84%of homeowners
Avatar for Sentri Homes
Sentri Homes
2.9(
47
)
Carpentry Framing - InstallCustom Cabinets - Build

Serving Roanoke, VA and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"I was very impressed with Sentri Homes - their customer service was excellent. They sent a subcontractor to install some vinyl laminate in my bathroom and he ended up getting glue all over the carpet in our bedroom. The sub ended up ghosting both me and Sentri, leaving me stuck with a ruined carpet. Sentri stuck with me for over a month to get the carpet replaced with the identical original and to get the vinyl job 100% completed. The carpet was a Home Depot exclusive and Sentri handled everything with them. I will be using Sentri for a much bigger renovation I have coming up soon, because I know that they will make sure everything gets done right no matter what problems come up. The vinyl looks great too."
20 neighbors recently requested a quote
Avatar for Scott Lynn
Scott Lynn
New to Angi
Furniture - Build Custom

Serving Roanoke, VA and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

We are a father and son team dedicated to bringing affordable basic home repairs and landscape work to those who need help. In these difficult economical times we understand that people are looking for affordable options without sacrificing quality. We offer discounted rates for seniors and veterans in order to show our thanks for everything that they have contributed. Let us be the helping hands you need to take some of the stress out of your life. We offer free estimates with no restrictions or pressure.

3 neighbors recently requested a quote
Avatar for Edward Nemitz LLC
Edward Nemitz LLC
New to Angi
Furniture - Build Custom

Serving Roanoke, VA and surrounding areas

Approved

Emergency services offered

Warranties offered

Small jobs welcome

Primarily we only take commercial work, however in this economy we feel diversity is key to success. We are experienced in Electrical Plumbing and general Handyman services. From drain cleaning to High-end Electronics installations. We hang TV's, install appliances, design and implement smarthome controls. Patching drywall and painting. Water heater replacement. Have a faucet that takes forever to get hot water, talk to us about solving that issue. We have 30 years experience in just about every small and odd job you can think of. We are not affraid to get dirty while keeping your property clean and clear of debris.

Final build
Original setup
Building the Tee
Add torque arrester
Pressure Switch

+13

Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)
Closet - BuildCustom Cabinets - Build

Serving Roanoke, VA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Excellent work. We purchased natural cherry cabinets in shaker style, with the panels made of solid wood rather than veneer. That is more difficult work, as each panel has to be constructed from several planks. Moreover, the clear finish would leave any flaws more visible. Simply put, the doors are beautiful--flawless in both construction and finish. They are similar in quality to custom cherry furniture we own."
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
...
Showing 1-10 of 68
Woodworking questions, answered by experts

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you’re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you’ll need to power up the saw again with a new piece. 

Butted joints—also called shaker style—don’t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.

If you don’t have a power saw with a blade where you can adjust the angle, you could use a miter box and hand saw to make the cuts. The miter box contains wide slots to support the piece of baseboard and other narrow slots to accommodate the blade of the hand saw. However, it’s tough to make non-standard cuts beyond 30 or 45 degrees when using a miter box.

Carpentry is a skilled trade and requires many years of experience to acquire the skills necessary to do the job efficiently and correctly. Because every home requires a carpenter at some stage of the building process, carpenters are typically in high demand. The higher the skill level, the higher the hourly rate the carpenter can charge.

The Roanoke, VA homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.