Get matched with top sink repair pros in Quantico, VA

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

Drop-in sinks, also known as top-mount, are the easiest to install, especially when they fit the existing sinkhole. Drop-in sinks sit on top of the counter and have a raised edge to keep water from splashing onto the floor. They come in different styles to match your kitchen design.

There are several types of sink drain stoppers, including pull-out, twist-and-pull, and pop-up. Pull-out sink stoppers can be removed by pulling on the stopper until it comes out of the drain. A twist-and-pull design requires lifting then turning the stopper to lock it in an open position and the opposite action (turning, then pressing down) to close it. A pop-up sink stopper works by pushing down the drain cover to open or close the passageway.