Get matched with top buffing and polishing pros in Hinckley, UT

Q: How long do marble floors last?

• <div><p>Most marble floors last at least 25 years, and they can last forever with proper care and maintenance. As a natural stone product, they have the edge when it comes to lasting longer than synthetic or softer materials, but they can become damaged. Grit and dirt that get ground into the surface will wear away the layers of stone over time, so cleaning and routine maintenance are necessary. In particular, regular sweeping and annual polishing and sealing will keep them looking beautiful and prevent wear and damage. </p></div>

Q: Is marble really high maintenance?

• <div><p>Marble is high maintenance, like most other types of natural stone flooring. However, because it is naturally a more porous stone, there are a few added care instructions. You will need to clean it often to prevent dirt and grit from scratching the finish and surface, keep it dry, clean up spills immediately, and have it professionally sealed and refinished at least once a year to maintain the shine and water-tight surface. However, investing in maintenance is a smart move because marble floors are among the most beautiful and valuable types of flooring when properly cared for.</p></div>

Q: What’s the difference between buffing vs. sanding?

• <div><p>Buffing is a less expensive and less time-consuming alternative to other floor repair techniques, but it&rsquo;s only ideal for removing surface-level scratches and damages. Floor-buffing machines work to gently smooth out the floor&rsquo;s top layer rather than removing it the way that sanding does. </p><p>This process is ideal for gently worn floors, but it won&rsquo;t have the desired impact on floors with severe damage. On the other hand, sanding fully strips the floor&rsquo;s top layer so damages beneath the surface are accessible to remove or repair. Since the process is more involved, it requires more time, tools, and experience to achieve the best possible results. </p></div>

Q: What is the best sealer for marble countertops?

• <div><p>A water-based, low- or no-VOC sealer is typically a good choice for marble countertops. Choose a sealant that is certified safe for contact with food when applying to kitchen countertops. For high-traffic areas, look for formulas that have heat-resistant and acid-resistant features. While there are economical and convenient spray-on sealers, they don&rsquo;t coat the surface as effectively as the ones you apply with a pad or brush. </p></div>

Q: How long does the stone restoration or polishing process take?

• <div><p>The restoration or polishing process can take anywhere from a few hours to several days, depending on the size, condition of the stone, and accessibility.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your buffing and polishing project in Hinckley, UT?

Select your specific project to find the pro for you.

Find Buffing and polishing pros in Hinckley

Retro Custom Metals Inc.

472 W. 3440 S.

5.00(

)

Retro Custom Metals Inc.

472 W. 3440 S.

5.00(

)

Customers say: Quick response

Recommended by 100% of Angi customers

Retro Custom Metals has over 25 years experience in the custom architectural sheet metal industry. Our family owned and operated company is the best around. Our management team are Utah pioneers when it comes to custom metal fabrication. Many of the custom metal pieces you see today were started within our organization. Let our experience and expertise help create a custom work of art for you. You dream up the piece you want to create and we can make it out of copper, zinc, Kynar steel, stainless steel, or rusted steel.

Mr. Sandless

299 South Main

4.67(

)

Mr. Sandless

299 South Main

4.67(

)

Customers say: Quick response

Recommended by 100% of Angi customers

Mr. Sandless uses sandless technology very similar to sanding but with a special non-toxic solution. We get deeper into wood than light sanding. Then we seal the floor with our own brand of commercial sealer and finish. It looks like Urethane, last's like urethane and it cleans like Urethane. But Unlike urethane there is no odor, and it dries in just one hour. So you can literally seal each floor with multiple coats in just a few hours. This is why our floors look so good and last so long! The clients can walk right on their floor and put furniture down as soon as we are finished. Mr. Sandless offers Quick, Courteous and Professional Service! We are the #1 Floor Refinisher in the World! We also offer Full Color Changes! Mr. Sandless is Lead Safe and Green Certified!

Custom Counter Tops

990 E Canyon Rd

5.00(

)

Custom Counter Tops

990 E Canyon Rd

5.00(

)

Customers say: Quick response

Recommended by 100% of Angi customers

We take pride in every project we do. You will find our work to be of the utmost quality and the finest craftsmanship. One of our greatest benefits we’ve received for this work is having you, our customer, so extremely pleased with the finished product –Chris Checketts We have enjoyed over 13 years in the counter top industry, with Chris adding another 20+ years of cabinet experience to our company. He can assist you in your layout and counter top need. Ray Checketts, his brother, is also part of our team. He adds 20+ years in cabinets, kitchen design and complete kitchen remodel experience. If you need ideas, he is the one to assist. Laura Wolford, is also part of our project manger team. She bring many years of interior design experience along with counter tops and kitchen layout. She can show you how to get the most of our your kitchen. We are excited to assist you in your new design, or remodel project. Come visit our slab gallery at 920 E Canyon Road in Providence, UTAH. Please call for an appointment. We can help you with your kitchen, bathroom, outdoor or basement kitchen, fireplace hearth, tub surround, or any other part of your home that you would like to add the beauty of stone to.

Buffing and Polishing questions, answered by experts

Most marble floors last at least 25 years, and they can last forever with proper care and maintenance. As a natural stone product, they have the edge when it comes to lasting longer than synthetic or softer materials, but they can become damaged. Grit and dirt that get ground into the surface will wear away the layers of stone over time, so cleaning and routine maintenance are necessary. In particular, regular sweeping and annual polishing and sealing will keep them looking beautiful and prevent wear and damage.

Marble is high maintenance, like most other types of natural stone flooring. However, because it is naturally a more porous stone, there are a few added care instructions. You will need to clean it often to prevent dirt and grit from scratching the finish and surface, keep it dry, clean up spills immediately, and have it professionally sealed and refinished at least once a year to maintain the shine and water-tight surface. However, investing in maintenance is a smart move because marble floors are among the most beautiful and valuable types of flooring when properly cared for.

Buffing is a less expensive and less time-consuming alternative to other floor repair techniques, but it’s only ideal for removing surface-level scratches and damages. Floor-buffing machines work to gently smooth out the floor’s top layer rather than removing it the way that sanding does.

This process is ideal for gently worn floors, but it won’t have the desired impact on floors with severe damage. On the other hand, sanding fully strips the floor’s top layer so damages beneath the surface are accessible to remove or repair. Since the process is more involved, it requires more time, tools, and experience to achieve the best possible results.

A water-based, low- or no-VOC sealer is typically a good choice for marble countertops. Choose a sealant that is certified safe for contact with food when applying to kitchen countertops. For high-traffic areas, look for formulas that have heat-resistant and acid-resistant features. While there are economical and convenient spray-on sealers, they don’t coat the surface as effectively as the ones you apply with a pad or brush.

The restoration or polishing process can take anywhere from a few hours to several days, depending on the size, condition of the stone, and accessibility.

The homeowners guide to home care is here

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Kat Brancato
•
Oct 10, 2025Oct 10, 2025
How Much is the Average Electric Bill? [2025 Data]
How much is the average electric bill in the United States? Learn how much the average electric bill costs in your state and ways to reduce it.
Sara Coleman
•
Oct 22, 2025Oct 22, 2025
How Much Does a Whole-House Surge Protector Cost? [2025 Data]
The cost of a whole-house surge protector depends on the materials, size, installation, and more. This guide will help you budget for a new surge protector.
Dan Simms
•
Oct 13, 2025Oct 13, 2025
2025 Cost to Install an Outlet in an Unfinished Basement
Need to run electricity to your basement? Learn about the cost to install an outlet in an unfinished basement and what factors affect your project cost.
Melissa Graham
•
Oct 1, 2025Oct 1, 2025
What Causes a Circuit Breaker to Trip?
When you need to figure out how to find what is tripping your circuit breaker, our guide can walk you through the possible causes and how to identify them.
Breyden Kellam
•
Oct 20, 2025Oct 20, 2025
How to Reset a Circuit Breaker in 5 Steps
If you use several electrical appliances in your home simultaneously and the power shuts down, an overloaded circuit could have tripped the breaker. Follow these simple steps to reset your breaker.
Josh Maday
•
Oct 3, 2025Oct 3, 2025
Federal Pacific Breakers: What You Need to Know
What’s wrong with Federal Pacific breaker panels? Get the details about why FPE breakers are no longer produced and what dangers they pose to your home.