Get matched with top pressure washers in Draper, UT

One of the most important factors to consider when buying a pressure washer is not just psi but also the machine’s overall cleaning power. This is based on both the psi and the GPM. Look for a cleaning rating, or effective cleaning unit (ECU), of up to 8,000 for most residential cleaning projects that require a pressure washer.

The best and fastest way to remove paint from a deck often involves combining a chemical stripper with a pressure washer. Gel-based paint strippers are highly recommended because their thick consistency makes them less messy and easier to apply than liquid strippers. After applying the stripper to loosen the paint, you can use a pressure washer to efficiently wash away the residue. When using a pressure washer for this task, it's important to use a low pressure (under 1000 PSI) to avoid forcing too much moisture into the wood, which could lead to mildew or rot.

The ideal PSI (pounds per square inch) for a pressure washer depends on the surface you are cleaning. For general home use, a pressure washer with a range of 2,000 to 3,000 PSI is recommended and powerful enough for most residential projects.

The specific PSI you should use varies by task:

• High-Pressure Tasks (2,500-3,000 PSI): Tough materials like concrete, stone, masonry, and brick can handle higher pressures. This is suitable for removing stubborn stains from driveways or cleaning graffiti.

• Low-Pressure Tasks (around 600-1,300 PSI): Softer surfaces require a gentler touch to avoid damage. Use a low PSI setting for cleaning wood decks (especially softwoods like pine and cedar), vinyl siding, outdoor furniture, and stucco.

For best results, choose the right nozzle for your surface, such as a 15-degree nozzle for siding or a surface cleaner attachment for driveways. Using an extendable wand can also make the work easier and more ergonomic.

No, you should not use a pressure washer or power washer on roof shingles, including asphalt shingles. The high water pressure is too strong and can damage the shingles by loosening their adhesive, forcing water underneath them, or causing them to fall off. The safer and better option is soft washing with a pump sprayer. For best results and to avoid damage, consider hiring a local roof cleaner to clean your shingles safely.