Get matched with top pressure washers in Murray, UT

On average, pressure washing a house can take anywhere from 30 minutes to three hours. The time frame to pressure wash or power wash your home, fence, or other property depends on the size of the project and the complexity and accessibility of the areas that need cleaning. Part of the time required to complete the job includes setup and removal of equipment needed. A two-story house with a steep roof may require working from scaffolding or a ladder, likely adding to the time required to finish the project. 

While some pressure washers, when used at lower settings, are ok to use on tires, we suggest proceeding with caution. While the high pressure alone won’t cause damage to your tires, pressure washers emit high-frequency pulsations that can damage the tires’ sidewall cords. Using a medium-bristle brush and soapy water is a better bet if you want to keep your tires in tip-top shape.

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

If you don’t use the right PSI setting for your fence’s material, then yes, pressure washing can ruin your fence. Specifically, if you use a PSI that's too powerful, you may permanently damage a fence. Pressure washers can also remove paint from fences, though this can be a great thing if you’re looking to restore an old wood fence.