Get matched with top carpenters in Walnut Springs, TX

Q: How can I find ceiling joists using simple tools like a hammer or a nail?

• <div><p>Yes, you can find ceiling joists using simple tools if a stud finder isn't available.</p><p>Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.</p><p>Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.</p></div>

Q: What is included in framing a house?

• <div><p>Stick frames, metal frames, or prefabricated concrete frames are included in framing a house, along with creating the framework and space for windows, doors, and entryways. Other aspects of developing a home&mdash;like drywall, insulation, windows, doors, and more&mdash;are not included in the cost to frame a house.</p></div>

Q: Can a bungalow have a second floor?

• <div><p>Traditionally, bungalows are single-story homes, although having a half or partial story on top of the first floor is common. While adding a second story to a bungalow is certainly possible, the home would no longer be considered a bungalow by the strictest definition.</p></div>

Q: Are ceiling joists load-bearing?

• <div><p>Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they&rsquo;re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them. </p></div>

Q: Should a door frame be nailed or screwed?

• <div><p>When hanging a door frame, it&rsquo;s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the <a href="https://www.angi.com/articles/install-interior-door">cost to replace a door frame</a> is about <b>$400</b>, but you can save on labor costs if you&rsquo;re confident in your ability to DIY the project. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your carpentry project in Walnut Springs, TX?

Select your specific project to find the pro for you.

Verified Reviews for Carpentry pros in Walnut Springs, TX

*The Angi rating for Carpentry companies in Walnut Springs, TX is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Carpentry needs.

*The HomeAdvisor rating for Carpentry companies in Walnut Springs, TX is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Carpentry needs.

Last update on May 16, 2026

Reviewed in May 2026
Nate Davis came out on time me repaired the doors in less time than his estimate,He gave me an estimate on repairing damaged siding and repairing and painting a room the work was finished under his estimate I highly recommend him for any remodeling and repairs
Full Scale LLC
Request a quote
Reviewed in January 2026
I’m very thankful for Good Hands Plumbing! They are fast, have great communication and they handle all kinds of plumbing problems. Phillip and his team were at our ranch to install a new sink in my kitchen. Very friendly, professional and courteous. Phillip and his team are very knowledgeable...
Good Hands Plumbing, LLC
Request a quote
Reviewed in July 2025
Super professional, I was looking for someone to do a cleaning before I moved in and they did such an amazing job, even going above and beyond the list I had given them. This house had been sitting vacant for a few months so there was a lot of dust and they didn’t cut any corners, made sure to...
5 Fairies Cleaning Service
Request a quote
Reviewed in April 2024
I highly recommend Jason and his team for your insulation needs. Jason was quick to respond with an estimate and scheduled the work with short notice. They got to the job at the scheduled time and completed the work in a timely manner. H. O. T. Foam is the one to call for your insulation...
H.O.T. Foam, LLC
Request a quote
Reviewed in July 2023
Arrived on time. And did excellent work preparing and chip sealing our driveway in the heat of the day.
Al's Paving
Request a quote
Reviewed in July 2023
The company was quick to contact me and were both knowledgeable and professional. They were able to do everything I asked of them and provided a variety of services. The work was done quickly and correctly. I would definitely hire them again and will recommend them to others. You will not be...
Orve Tree Service
Request a quote
Reviewed in October 2022
They did an amazing job on my bathroom remodel. They stayed on budget and were extremely professional. I will definitely use them again.
TSI
Request a quote
Reviewed in August 2022
The whole operation went smooth and efficient. The carport was releveled, after the re-build, as well as height adjusted to accommodate a taller vehicle. Took Glenn less than a day to do the whole job.
Property Restoration
Request a quote
Reviewed in March 2022
Very professional, quick & ge & his office always kept me in the loop.
Walk By Faith Roofing
Request a quote
Reviewed in August 2021
He arrived early and immediately got started on the work. He is very professional, courteous, customer centric, and informative. I learned a lot about my house and I really appreciated him showing me in person as well as going over the report. The low cost was also a plus!
Watson Building Inspections
Request a quote

Find Carpenters in Walnut Springs

EMJ Carpentry

4.9(

)

Arbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - InstallCarpentry Framing - Repair+9 more

Serving Walnut Springs, TX and surrounding areas

Approved

Super Service Award Winner

In business since 2018

Free estimates

Emergency services offered

"I was very pleased with the quality of the carpentry work but the painter who worked with the carpenter did not do a quality job. Would hire the carpenter again but would not opt to have anything painted."

Finished Carpentry and Woodworking Project

+85

Response time2 days

Response rate100%

2 neighbors recently requested a quote

Furniture - Build Custom

Serving Walnut Springs, TX and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

"Responsive, on time, gave good options"

9 neighbors recently requested a quote

Recommended by96%of homeowners

Request Quote

Intercessions Solutions

4.8(

)

Interior Trim and Decorative Moldings - Repair

Serving Walnut Springs, TX and surrounding areas

Approved

In business since 2021

Free estimates

Small jobs welcome

"Aaron was great! This was a very big project that was very sentimental to me and he took great care with a piece that was very special. He was polite and personable!"

Response time5 hrs

Response rate97%

48 neighbors recently requested a quote

Request Quote

A Cut Above Woodworks

4.7(

)

Furniture - Build CustomCloset - Build

Serving Walnut Springs, TX and surrounding areas

Approved

In business since 2020

Free estimates

Credit card accepted

A Cut Above Woodworks is locally owned and operated. We treat our customers like family and get the job done right the first time! Give us a call and we can come out and give you a free estimate.

+47

10 neighbors recently requested a quote

Recommended by70%of homeowners

Furniture - Build Custom

Serving Walnut Springs, TX and surrounding areas

Approved

"My Expectation wasn't even close to the work done. The job was above and beyond what he accomplished. Thank you JD for a job well done. I recommend him for just about everything u can think of from house hold maintenance to even car maintenance. 👍🏾"

6 neighbors recently requested a quote

Request Quote

Hill Fabrication & Services

5.0(

)

Furniture - Build Custom

Serving Walnut Springs, TX and surrounding areas

Approved

In business since 2020

Free estimates

Credit card accepted

"Quality work on a custom table. Work completed within time quoted. Great price and great work."

Response time1 day

1 neighbors recently requested a quote

Recommended by100%of homeowners

Carpentry Framing - Install

Serving Walnut Springs, TX and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

20 neighbors recently requested a quote

Request Quote

Danis Custom Trim

New to Angi

Carpentry Framing - InstallCarpentry Framing - RepairCloset - Build+7 more

Serving Walnut Springs, TX and surrounding areas

Approved

40 years experience in trim carpentry. Experience includes new builds, remodels, residential\nAnd commercial.

Carpentry Framing - InstallCarpentry Framing - RepairCloset - Build+6 more

Serving Walnut Springs, TX and surrounding areas

Approved

Free estimates

Warranties offered

Credit card accepted

"Nate Davis came out on time me repaired the doors in less time than his estimate,He gave me an estimate on repairing damaged siding and repairing and painting a room the work was finished under his estimate I highly recommend him for any remodeling and repairs"

Request Quote

D.E. Gordon Construction

New to Angi

Carpentry Framing - InstallDeck or Porch - RepairGazebo or Freestanding Porch - Repair+1 more

Serving Walnut Springs, TX and surrounding areas

Approved

In business since 2002

Free estimates

Credit card accepted

D.E. Gordon Construction proudly serves our customers with pride, integrity and attention to the details that matter most to you. This is one of the many things that sets us apart from the rest. We are locally owned and operated so give us a call today! In rural areas we offer New Electrical Service Install as well as New Plumbing Install, also Off-Grid Wind and Solar Install.

Request Quote

...

Showing 1-10 of 145

Carpentry questions, answered by experts

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.

Stick frames, metal frames, or prefabricated concrete frames are included in framing a house, along with creating the framework and space for windows, doors, and entryways. Other aspects of developing a home—like drywall, insulation, windows, doors, and more—are not included in the cost to frame a house.

Traditionally, bungalows are single-story homes, although having a half or partial story on top of the first floor is common. While adding a second story to a bungalow is certainly possible, the home would no longer be considered a bungalow by the strictest definition.

Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they’re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them.

When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project.

The Walnut Springs, TX homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does Carpentry Framing Repair Cost? [2026 Data]
Get the latest carpentry framing repair cost estimates. Learn what impacts your price and how to budget for your framing repair project.
Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Kate Fann
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Install Shiplap? [2026 Data]
The cost to install shiplap siding or wall surfaces in your home depends on several factors, including the material type and the size of your project.
Jenna Jonaitis
•
Jul 9, 2026Jul 9, 2026
A Complete Guide to Common Carpentry and Construction Terms You Should Know
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
Mizuki Hisaka
•
Jul 9, 2026Jul 9, 2026
What Is Millwork?: A Complete Guide
What is millwork? If you’re curious to learn more about millwork and how builders incorporate it into your home, read this guide.
Sara Coleman
•
Jul 20, 2026Jul 20, 2026
Journeyman Carpenter vs. Carpenter: Who to Hire for Your Project
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.