Get matched with top pool and spa technicians in Sunset, TX

Properly maintaining your hot tub will prevent serious issues from occurring down the road. You should replace the filter once a year, regularly look for and repair small cracks in the shell, and test the water quality every few months. You can do this yourself for less than $100 per year.

You can also hire a hot tub service to service your hot tub annually to identify problems early, which could save you money in the long run. They cost about $100 to $200 per call.

If water is left inside the hot tub pump over a cold winter, it could freeze and severely damage the pump, water lines, and jets. That can cause leaks, which require very expensive repairs. Freezing or leftover water can stain and damage the hot tub shell, which leads to replacement. Even in mild climates, leaving sitting water in the tub or pipes for a long period of unuse is a bad idea, since disinfecting chemicals fade and the water can develop bacteria, algae, and other big headaches when it’s time to use the tub again.

The best thing with which to clean a hot tub is whatever the manufacturer recommends; in most cases, this is a gentle surface cleaner and a soft cloth. Recommended hot tub cleaners can include specially formulated cleaning agents, mild dish soap, baking soda, vinegar, or diluted bleach. For your hot tub exterior, choose wood or vinyl cleaner (depending on the casing material).

You should never use household cleaning products, harsh chemicals such as undiluted bleach or acids, or abrasive cleansers or cloths, as these can scratch or etch your hot tub’s coating or shell and cause permanent damage.

Yes, hot tubs can use a significant amount of electricity, primarily to keep the water heated. A typical hot tub uses between 1,500 and 6,000 watts, and the pump can add another 1,500 watts. This usage can result in a monthly cost of around $20 to $30. The exact amount of electricity consumed depends on several factors, including the hot tub's age, size, heater voltage (120V vs. 240V), usage habits, and thermostat setting. Newer, energy-efficient models generally use less power than older ones. To reduce electricity costs, consider investing in an energy-efficient model, using a quality insulated cover with a thermal blanket, and keeping the filters clean.