Get matched with top backsplash installation pros in Santa Rosa, TX

As long as you follow the instructions on your peel-and-stick tile packaging, it should not damage your walls. A possible instance when you may accidentally damage your walls is if you install tiles improperly using additional adhesives that aren’t recommended.

Also, you can damage your walls if you’re not careful when removing tile. For example, you could accidentally make holes in the drywall with a paint scraper if you don’t heat the adhesive long enough before trying to pry it off.

The easiest tile size to install is large tiles, and they’re easier to install than small tiles—the job is faster and simpler when there’s less placing, adhering, and grouting to do. However, when tiles get really big, they’re more difficult to handle, cut, and fit. Standard floor tile sizes are 12-by-12 inches, 18-by-18 inches, and 12-by-24 inches.

Per the International Code Council, walk-in shower floors should have a minimum slope of 1/4-inch per foot (or a 2% slope) towards the drain. The slope should be no steeper than 1/2-inch per foot (or a 4% slope). This helps safely direct water into the drain rather than all over your bathroom.

Yes, it’s always a good idea to keep a box or two of spare tiles after a home renovation project. Tiles can crack from improper installation, heavy foot traffic, and impact from drops. Having some extra tile on hand can make replacement fast, easy, and affordable. Plus, some manufacturers might discontinue particular colors or styles, and slight variations in tile colors between batches could mean mismatched tiles even if your product isn’t discontinued. Having a few spare tiles in storage can help avoid these issues, as well.