Get matched with top toilet pros in Maxwell, TX

Toilet handles can get stuck for a couple of reasons, but it’s commonly an issue with the chain. Remove the lid and check the chain’s connection, running from the flapper to the handle arm. Sometimes the chain gets snagged on or against another part of the tank. 

The chain might not have the right tension. For example, a chain that’s too short can make the handle feel stuck. Check that there’s some slack in the chain. Old, worn-out flappers can get stuck, too. In this case, you’ll need to see which size toilet flapper you need.

The water in your toilet tank refills after each flush. So if you see dirty water in the bowl, you should check the tank to see if it’s coming from there. A dirty toilet tank can be the result of sediment in the water itself—-after all, the water will sit in the tank between flushes and can cause the interior to change into a dingy color. Faulty toilet components, like an old flapper, corroded tank lever or chain, or damaged seals, can also lead to dirty water as the materials break down inside the tank. You can clean the toilet tank or change out the old parts to give it a fresh start.

The Thanksgiving holiday period is one of the busiest times of the year for plumbers. Both Thanksgiving Day and the day after, often called Black Friday or "Brown Friday" by plumbing professionals, see a significant increase in service requests. This is because a house full of guests, large holiday meals, and unfamiliarity with the home's plumbing can lead to clogged drains, garbage disposal issues, and sewer line backups. Outside of the holidays, the busiest weekdays for plumbers are typically Monday and Tuesday, as many people discover plumbing problems over the weekend but wait to call for service. Despite the holiday, you can rest assured that many plumbers work on Thanksgiving and Black Friday to handle the surge in emergency calls.

You generally cannot replace a 10-inch rough-in toilet with a 12-inch model without making significant plumbing updates. A 12-inch rough-in toilet will not fit a 10-inch rough-in space because the floor drain is in the wrong position. To accommodate the larger toilet, you would need to move the drainpipe, which could cost between $0.75 and $30 per linear foot, plus labor. In most cases, it is more cost-effective and simpler to purchase a new 10-inch rough-in toilet. However, it is possible to install a 10-inch rough-in toilet in a 12-inch space by using a longer connector.