Get matched with top glaziers in Denton, TX

Wall-to-wall mirrors have fallen out of popularity in recent years and have several drawbacks. They take up a lot of space, which can overwhelm small bathrooms. If you like the look, a wall of reflective medicine cabinets can add storage. Just keep in mind that a wall of mirrors requires more maintenance because smudges and splashes are more visible than on a wall.

Yes, it is possible to repair a damaged or cracked mirror, but whether you should do it yourself depends on the extent of the damage. For minor issues like small chips, cracks, and scratches, you can use a DIY approach. Resin-based repair kits can fix minor cracks, while scratches can often be removed with metal polish, nail polish, baking soda, or a glass polisher. Always follow the manufacturer’s instructions for the best results.

However, for more significant damage, DIY repair is not recommended. Repairing and resilvering mirrors is a delicate process that can involve caustic chemicals and requires a high level of precision. The materials for a DIY attempt can cost over $100, which may not be a significant saving compared to hiring a professional. Since a failed attempt could result in more damage and higher repair costs, it is often better to hire a mirror repair expert from the start, especially for large, valuable, or extensively damaged mirrors.

You should dust your mirrors once every one to two weeks as a part of your normal cleaning routine, and you should plan on cleaning with a glass cleaner or DIY cleaning solution once a month or so. This will help reduce the buildup of hygiene products like hair spray on the mirror, as well as oils and dirt from fingers. You can always spot-clean between regular cleanings if you notice your mirror getting dirty or smudged.

There are a few reasons your mirrors might have smears on them after cleaning, but the two most likely are remaining cleaning product and minerals from hard water. If you used a commercial glass cleaner, consider spraying down the mirror with a 1-to-1 ratio of white vinegar and water after cleaning and then wiping it dry with a cotton cloth. If you suspect hard water is the issue, use a cotton ball soaked in rubbing alcohol to spot-clean the streaks, and then let the mirror air-dry.