"Ed Riley is extremely knowledgeable about what causes lighting and how to protect from it. He explained to me which and how structures develop static electricity that lead to lighting discharges in a way that the physics made sense to me. They were also reasonably priced and kept their word. Definitely recommend them."
"John Corrigan and his sons are outstanding! They did outstanding work installing our lighting rods at a reasonable price. They were prompt, very professional and honest. I would call them again and recommend them to anyone."
"We were contacted immediately regarding adding a lightning protection system on our home. Seamus was very thorough and knowledgeable regarding our concerns. He and his crew showed up and were very professional and efficient. We are very pleased with the installation and highly recommend Donahue’s."
"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
"Chris was great. He showed up when he promised. Completed the job and then cleaned up! Very easy to work with. I will definitely use him again if I need something."
"Jim Benton of Country Boys Electric came out the day after my call for a bid. He walked through our shell of a log cabin in the woods, was very thoughtful, made many great suggestions about where to put lights and plugs, described the work they would do and within a few days we has his written bid. We liked and trusted Jim immediately and they started to work in a few days. His workers were very professional, arrived on time, worked well with us. They did all the wiring and then had to wait about a month for the sheetrock and painters to do their work. We called them back and they were ready to install lights and fans and finish the job. We were so please with their work. They were very reliable and on time, even though they had to drive 40 miles from their shop to our place each day.We would highly recommend them to others. "
"My house was under construction. and had already gotten struck by lightning so time was critical as I knew it could happen again. I have a home with tall roof peaks and built on a hill. They came out quickly and started right away and their prices were way less than the other company s. I will use them again when my barn is constructed."
"Excellent installation in timely, professional, clean and courteous, Received a full proposal prior to work for solar panels to deliver 80 percent or more of yearly electricity needs. The entire start to finish service was fantastic. Thanks,"
Most LED bulbs have a plastic covering, while incandescent bulbs will be made from glass. This is because LED bulbs don’t produce as much heat as incandescent bulbs, so the covering doesn’t need to be as heat resistant. Also, an LED light bulb will usually have a marking on its base that identifies it as an LED.
Yes. Like other trained specialists, electricians need to be licensed in their state of operation, and carry specific kinds of insurance required by that state, which usually includes general liability insurance and surety bonds. When choosing an electrician, always pay attention to these details, and avoid electricians who can’t offer proof. When it comes to wiring, you want experienced, trained pros doing the work.
You can test an electric fence with a multimeter, but you’ll need to set the multimeter to the correct voltage measurement—such as alternative current (AC) or direct current (DC) and range—depending on your fence. You can find the voltage type and range in the fence’s user manual.
The number of outdoor outlets that can be on one circuit depends on the circuit's capacity and the electrical load of each outlet. Outdoor outlets should ideally be on a dedicated circuit that is not shared with other outlets, and each outlet should be rated for at least 15 amps. A circuit rated for at least 20 amps is recommended. It’s important to use GFCI protection for all outdoor outlets to prevent electrical shocks. Overall, it's crucial to avoid overloading the circuit and take necessary safety precautions.
While it’s not possible to put a main breaker in a main lug panel, it’s possible to convert a main lug to a main breaker. Converting to a main breaker panel offers increased safety, simplified control, compliance with building codes, and adaptation to changing electrical needs, especially when adding new circuits or upgrading the system.
The Crowell, TX homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
