Top-rated structural engineers.

Get matched with top structural engineers in Corpus Christi, TX

There are 1 highly-rated local structural engineers.

Need a pro for your structural engineering project in Corpus Christi, TX?

Select your specific project to find the pro for you.

Find Structural engineers in Corpus Christi

Avatar for USA Foundation Repair

USA Foundation Repair

4610 Ayers St
5.00(
6
)
Approved Pro

USA Foundation Repair

4610 Ayers St
5.00(
6
)
Approved Pro
18 local quotes requested
15 years of experience

USA Foundation Repair has been setting high standards for the Corpus Christi TX area for many years. USA Foundation Repair is located in Corpus Christi TX, but you can still find us on Yelp, BBB, or the Super Pages! If you prefer a more personal experience you can call us at (361) 334-2323, or stop by our store located at 4610 Ayers St, Corpus Christi. We are also located near the USS Lexington Naval Musuem, the Texas state Aquarium, and the Corpus Christi Internalnational Airport! It is actually fairly simple to get to our office building from the Corpus Christi International Airport, follow these simple directions and we’ll have you at our doorstep in no time! Leaving the airport you want to get on TX-44 East from Pinson Drive, Glasson Drive, International Drive, and Agnes Street. Once on the the TX-44 East, you want to take TX-358 East to South Padre Island Drive. Take your exit towards Ayers Street from TX-358 East. Once there you want to drive until you hit Ayers street which is where we are located at.

"They did a great job and they are great people to work with. I would highly recommend them and I would hire them again."

Brad S on April 2020

USA Foundation Repair has been setting high standards for the Corpus Christi TX area for many years. USA Foundation Repair is located in Corpus Christi TX, but you can still find us on Yelp, BBB, or the Super Pages! If you prefer a more personal experience you can call us at (361) 334-2323, or stop by our store located at 4610 Ayers St, Corpus Christi. We are also located near the USS Lexington Naval Musuem, the Texas state Aquarium, and the Corpus Christi Internalnational Airport! It is actually fairly simple to get to our office building from the Corpus Christi International Airport, follow these simple directions and we’ll have you at our doorstep in no time! Leaving the airport you want to get on TX-44 East from Pinson Drive, Glasson Drive, International Drive, and Agnes Street. Once on the the TX-44 East, you want to take TX-358 East to South Padre Island Drive. Take your exit towards Ayers Street from TX-358 East. Once there you want to drive until you hit Ayers street which is where we are located at.

"They did a great job and they are great people to work with. I would highly recommend them and I would hire them again."

Brad S on April 2020


Caisson Engineers

5232 Terrace View Ln
4.33(
6
)
Approved Pro

Caisson Engineers

5232 Terrace View Ln
4.33(
6
)
Approved Pro
Customers say: Quality work
281 local quotes requested
12 years of experience

Caisson Engineers, located in DFW area, provides the best structural engineering services for residential, commercial and industrial projects as well as foundation design and foundation repair plans. Our highly educated engineers with over 25 years of experience can assist clients by preparing the engineering designs in a short time with the most accurate designs conforming to the codes and City requirements. We are an owner-operated firm.

"No one ever contacted me."

Todd D on September 2025

Caisson Engineers, located in DFW area, provides the best structural engineering services for residential, commercial and industrial projects as well as foundation design and foundation repair plans. Our highly educated engineers with over 25 years of experience can assist clients by preparing the engineering designs in a short time with the most accurate designs conforming to the codes and City requirements. We are an owner-operated firm.

"No one ever contacted me."

Todd D on September 2025


Avatar for Benning Engineering

Benning Engineering

5503 South Staples Street
4.86(
11
)
Approved Pro

Benning Engineering

5503 South Staples Street
4.86(
11
)
Approved Pro
Customers say: Terrific value
Recommended by 90% of Angi customers
Recommended by 90% of HomeAdvisor customers
8 years of experience

Benning Engineering provides residential windstorm related engineering services. This includes simple construction such as window, door or roof replacement up to more complicated projects such as room addition. Benning Engineering is licensed with the State of Texas as well as being accredited with the Texas Department of Insurance. We are able to provide both ongoing construction certification as well as post construction certification.

"Communication was always very good. Very helpful with any how to questions and what meets city codes. Iâ m very happy with my choice of Benning Engineering. I would definitely call on Mr Mike Benning if I ever needed his help."

Gilda G on June 2024

Benning Engineering provides residential windstorm related engineering services. This includes simple construction such as window, door or roof replacement up to more complicated projects such as room addition. Benning Engineering is licensed with the State of Texas as well as being accredited with the Texas Department of Insurance. We are able to provide both ongoing construction certification as well as post construction certification.

"Communication was always very good. Very helpful with any how to questions and what meets city codes. Iâ m very happy with my choice of Benning Engineering. I would definitely call on Mr Mike Benning if I ever needed his help."

Gilda G on June 2024


Aransas Builders

No reviews yet

Aransas Builders

No reviews yet
Free onsite estimate

We are a local company and we know how to treat customers right. We do any projects. From decks boat lifts to additions complete home remodels and new construction. We are the best in south Texas because our integrity and customer satisfaction are number one priority.

We are a local company and we know how to treat customers right. We do any projects. From decks boat lifts to additions complete home remodels and new construction. We are the best in south Texas because our integrity and customer satisfaction are number one priority.


Matrix Technology Services

OKC
No reviews yet

Matrix Technology Services

OKC
No reviews yet
12 years of experience

Matrix Technology Services is an Oklahoma grown company founded and operated by a born and raised Oklahoma Veteran. Our commitment to quality and customer satisfaction will not be matched. With over 20 years of experience in electronics and low voltage wiring, we bring a unique combination of abilities and qualifications. We are a Bicsi Certified company. Knowledge and education are an integral part of our operation and philosophy. We seek to provide only the most qualified ICT cabling professionals in the industry. Contact us today to see how we can improve your ICT experience.

Matrix Technology Services is an Oklahoma grown company founded and operated by a born and raised Oklahoma Veteran. Our commitment to quality and customer satisfaction will not be matched. With over 20 years of experience in electronics and low voltage wiring, we bring a unique combination of abilities and qualifications. We are a Bicsi Certified company. Knowledge and education are an integral part of our operation and philosophy. We seek to provide only the most qualified ICT cabling professionals in the industry. Contact us today to see how we can improve your ICT experience.


Zodiac Structual Engineering

612 Nolana Loop
No reviews yet

Zodiac Structual Engineering

612 Nolana Loop
No reviews yet
Free onsite estimate

Zodiac Structural Engineering specializes in structural engineering analyzes, design and inspections of new and existing residential homes and commercial buildings. We are licensed by the Texas Board of Professional Engineers and The Department of Insurance to provide structural engineering services such as windstorm designs and existing foundation inspections. With a combine experience of 15 years, we go beyond guaranteeing the structural safety of your project while communicating and collaborating closely with your team to make sure our design meets your exact needs, budget and timeline.

Zodiac Structural Engineering specializes in structural engineering analyzes, design and inspections of new and existing residential homes and commercial buildings. We are licensed by the Texas Board of Professional Engineers and The Department of Insurance to provide structural engineering services such as windstorm designs and existing foundation inspections. With a combine experience of 15 years, we go beyond guaranteeing the structural safety of your project while communicating and collaborating closely with your team to make sure our design meets your exact needs, budget and timeline.


Benning Engineering PLLC

5503 S Staples St
4.83(
6
)

Benning Engineering PLLC

5503 S Staples St
4.83(
6
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Benning Engineering is a Texas State licensed engineering services company providing windstorm inspection services. We are Texas Department of Insurance (TDI) certified to perform inspections and certification for ongoing construction as well as certified by the Texas Windstorm Insurance Agency (TWIA) to perform post-construction checks. Benning Engineering can also provide design services for windstorm resistant construction. Please see our list of fees and services for specific information, or call 361-765-9672 with questions. We provide windstorm certification for both ongoing and post construction needs. Design services also provided for conventional wood frame construction. We perform inspection and certification for all projects including, roofs, siding, windows etc. Small projects welcome.

"They were great, fast, prompt, knowledgeable, on time and had a fair price. They were fine in the inspection."

Carmen G on June 2020

Benning Engineering is a Texas State licensed engineering services company providing windstorm inspection services. We are Texas Department of Insurance (TDI) certified to perform inspections and certification for ongoing construction as well as certified by the Texas Windstorm Insurance Agency (TWIA) to perform post-construction checks. Benning Engineering can also provide design services for windstorm resistant construction. Please see our list of fees and services for specific information, or call 361-765-9672 with questions. We provide windstorm certification for both ongoing and post construction needs. Design services also provided for conventional wood frame construction. We perform inspection and certification for all projects including, roofs, siding, windows etc. Small projects welcome.

"They were great, fast, prompt, knowledgeable, on time and had a fair price. They were fine in the inspection."

Carmen G on June 2020



ROCK ENGINEERING & TESTING LAB

6817 Leopard St
No reviews yet

ROCK ENGINEERING & TESTING LAB

6817 Leopard St
No reviews yet
27 years of experience

RETL, Inc. (TBPE Firm Reg. No. 2101) has been in business since 1998. It is the largest and only locally owned and headquartered Engineering Laboratory in the Coastal Bend with approximately 30 employees. RETL, Inc. is accredited by AASHTO for testing Soils, Aggregates, Concrete, and Hotmix, and is also a United States Army Corp of Engineers validated operation. Further, TxDOT has precertified RETL for all categories related to Geotechnical Engineering, Foundation Recommendations, and Construction Materials Engineering. RETL, Inc. is a certified Small, Woman, Minority, Asian, Disadvantaged, and Historically Underutilized Business. Billing is based upon client-approved estimated rates and actual work performed.

RETL, Inc. (TBPE Firm Reg. No. 2101) has been in business since 1998. It is the largest and only locally owned and headquartered Engineering Laboratory in the Coastal Bend with approximately 30 employees. RETL, Inc. is accredited by AASHTO for testing Soils, Aggregates, Concrete, and Hotmix, and is also a United States Army Corp of Engineers validated operation. Further, TxDOT has precertified RETL for all categories related to Geotechnical Engineering, Foundation Recommendations, and Construction Materials Engineering. RETL, Inc. is a certified Small, Woman, Minority, Asian, Disadvantaged, and Historically Underutilized Business. Billing is based upon client-approved estimated rates and actual work performed.


AK Utilities

310 Morton St
No reviews yet

AK Utilities

310 Morton St
No reviews yet
25 years of experience

AK UTILITIES is a privately owned underground locating service. Texas One Call does not recognize private utilities such as independently owned gas, power or communication lines just to name a few. Also utilities that are non members of Texas One Call are not notified when excavation is taking place. Let our experienced and safety trained technicians check your work area to ensure no damages occur and to give you optimum placement for your work. We are a Gold Star Member of the Better Business Bureau, experienced and insured. In addition we are safety trained and certified and TWIC card certified. When you are installing landscaping, planting a tree, building an addition or building a building let us assist you in preventing damage to your property as well as your neighbors. We accept all credit cards and checks. Call us to schedule an appointment.

AK UTILITIES is a privately owned underground locating service. Texas One Call does not recognize private utilities such as independently owned gas, power or communication lines just to name a few. Also utilities that are non members of Texas One Call are not notified when excavation is taking place. Let our experienced and safety trained technicians check your work area to ensure no damages occur and to give you optimum placement for your work. We are a Gold Star Member of the Better Business Bureau, experienced and insured. In addition we are safety trained and certified and TWIC card certified. When you are installing landscaping, planting a tree, building an addition or building a building let us assist you in preventing damage to your property as well as your neighbors. We accept all credit cards and checks. Call us to schedule an appointment.

Showing 1-10 of 11
Structural Engineering questions, answered by experts

Structural engineers typically charge between $100 and $250 per hour, but many jobs won’t be based on a per-hour fee. Instead, the structural engineer will offer a flat rate for the inspection and structural calculations. The flat rate for a structural engineer costs an average of around $550, but you could see prices ranging from $300 to $800, depending on the complexity of your project and how easy it is to access certain parts of your home for the inspection.

Although the two terms are closely related and often used interchangeably, pier and beam foundations and crawl spaces are different things. A pier and beam foundation is made up of concrete piers and wooden beams and creates a space under the home known as a crawl space. There are several types of foundations that create crawl spaces, often collectively known as “crawl space foundations,” but the crawl space itself is separate from the foundation. 

The primary reason homes have crawl spaces is so the foundation can reach down below the frost line to avoid dangerous soil movement and structural damage when the ground freezes. They’re more popular in colder climates where the ground freezes down to a few feet, and slabs are most popular in warmer areas where there is no frost line. Crawl spaces also provide a space for utility lines to run where they’re at less of a risk of freezing.

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

Yes, walls on the top floor can be load-bearing if stacked on the floor’s foundation.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Corpus Christi, TX homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.