Top-rated septic tank pros.

Get matched with top septic tank pros in Comanche, TX

Enter your zip and get matched with up to 5 pros

Need a pro for your septic tank service project in Comanche, TX?

Select your specific project to find the pro for you.

Find Septic tank pros in Comanche

WS Septic Pumping & Installation, LLC
5.0(
5
)

Serving Comanche, TX and surrounding areas

In business since 2020

Free estimates

Credit card accepted

"Wesley was great. We not only had a full septic tank to pump out, Wesley found that both toilet exit tubes were clogged, and he resolved this issue as well. My wife and I didn’t have the funds for this emergency pump-out, and Wesley agreed to do the work now and just send us an invoice to pay when we get our pay checks. I also found that he installs septic tanks/systems, and we are planning to have him do the work at another property. Having our toilets flush after three days of misery was music to our ears!"
Response time2 hrs
Response rate97%
Recommended by100%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)

Serving Comanche, TX and surrounding areas

In business since 1971

Credit card accepted

"Takes for ever to get a return a call. Also took a week to get someone out for repairs. They said they would reimburse me for septic repairs and it took over 3 months for that to happen."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Cottens Septic Pumping
New to Angi

Serving Comanche, TX and surrounding areas

In business since 1989

Free estimates

We are a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. We offer a variety of septic cleaning services. You will find us to be competitively priced with close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!

Response time3 hrs
Septic Tanks questions, answered by experts

A well pressure tank typically lasts between 5 and 15 years. However, its lifespan can be influenced by several factors. High-quality, appropriately sized tanks tend to last longer, with some top-of-the-line models lasting up to 30 years. Regular annual maintenance, including inspections, cleaning, and prompt repairs, is crucial for extending the tank's life. Water quality also plays a significant role; water with high levels of sediment, minerals, or rocks can cause premature wear. Overworking an undersized tank can also limit its lifespan.

There are a variety of different types of septic systems that can work in your home—such as conventional anaerobic systems, chamber systems, drip distribution systems and mound septic systems. All of them work using natural processes to break down solid waste and effectively treat wastewater without needing to be connected to a city sewer system. Which type of septic system you need will depend on characteristics of your property like how high the bedrock is or groundwater table is. Different types of systems come at different costs to install.

Perc rates vary dramatically, and a good perc rate could be anything from 5 minutes per inch of drainage to 60 minutes per inch. The lower the number, the faster your system will drain and the more effective it will be. A 60-minute-per-inch drain rate is the highest number considered to be good, or even allowable, draining.

The pressure in a well pressure tank should be set 2 to 3 PSI below the pump's cut-on pressure. The cut-on pressure is the lower number in the pressure setting (e.g., the '30' in 30/50 PSI) and is the point at which the pump starts. The cut-out pressure is the higher number, where the pump stops.

For example:

  • If your pressure switch is set to 30/50 PSI, the tank pressure should be 27-28 PSI.

  • If your pressure switch is set to 40/60 PSI, the tank pressure should be 38 PSI.

Common pressure settings for household applications include 20/40, 30/50, and 40/60 PSI. The difference between the cut-on and cut-out pressure is typically 20 PSI.

For the most part, choosing between 30/50 psi and 40/60 psi is based on your water-pressure preference. However, it can also depend a little bit on your house—if you have older plumbing, a lower water pressure can be easier on the pipes (and a bit more gentle on your well pump). 

The lower 30/50 pressure is usually enough for a single-story home, but you may want 40/60 if you have multiple stories, as the extra pressure helps water flow smoothly up to the second floor.

The Comanche, TX homeowners’ guide to septic tank services

From average costs to expert advice, get all the answers you need to get your job done.