Get matched with top siding pros in Calvert, TX

To calculate how much siding you need for exterior walls, first measure the height and width of the rectangular walls. For the triangular gable walls, measure the width and then the height from the ground to the tallest gable point.

• For the rectangular walls, the calculation is: length x height

• For the triangular gable walls, the calculation is: (length x height) / 2

Once you add these up, include an additional 10% to account for any wastage.

If you buy new cedar, the process of cutting it usually roughs up the surface enough that it doesn’t require sanding. However, if you buy older cedar or you’re repurposing it from another application, it’s a good idea to sand it. This helps the stain settle into the grain, and results in a more uniform appearance.

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.

Yes, the thickness of siding is an important factor to consider when replacing it. Siding thickness helps to determine how your home retains and redirects heat. While thicker siding has a premium price, it offers greater strength and durability, stronger insulation, better wind and weather resistance, increased rigidity, and better soundproofing.