Get matched with top electricians in Benavides, TX

Yes, you can put a dimmer on a three-way switch, but it can’t be the same kind of dimmer you’d put on a standard light switch. A three-way switch requires a three-way dimmer. If two switches control a single or multiple lights, then you need a three-way dimmer. The type of light bulb should also be compatible with your fixture and dimmer.

The best place to put an electrical outlet depends on your needs. A good rule of thumb is to install outlets every 6 feet in large rooms. Hallways over 10 feet long need one electrical outlet minimum. 

If you find yourself needing extra plug-ins for all of your gadgets, you may want to increase the number of electrical outlets in your room. When adding outlets, keep in mind that older homes could have outdated electrical panels. In these cases, you may need a pro to upgrade you from 100-amp to 200-amp service before increasing the power load.

Basic smart light switches are available for as little as $20. If you can install them yourself, it’s a home upgrade that won’t break the bank. Many homeowners view them as a worthwhile investment for the additional convenience and security they can offer. However, they are a little more tricky to install than standard light switches, so if you don’t have the electrical knowledge to do a DIY job, unless you need a lighting upgrade, remember these are a nice-to-have rather than a necessary purchase.

According to the National Electrical Code (NEC), GFCI outlets should be installed in wet or damp locations where they might be splashed with water or other liquids. This is to protect against ground faults, which are more common around water. Specific areas that require GFCI outlets include kitchens (especially near counters), bathrooms, laundry rooms, basements, garages, and all outdoor receptacles. Depending on local electrical codes, you may need at least one GFCI outlet in these rooms, or every outlet in the area may need to be GFCI protected.