Get matched with top electricians in Sandia, TX

Standard electric water heaters (about 40 gallons) typically need a 30-amp circuit breaker. But if you have a newer model, a tankless water heater, or one that’s more energy efficient, you’ll likely need a higher amperage to power it. 

Having the right size circuit breaker for your water heater is an important part of making sure it heats water efficiently and runs safely. A licensed electrician can help you navigate your options, and determine what you need for your new water heater. 

This depends on how many outlets you have and the current status of your electrical system. The cost to ground an outlet clocks in at $75 to $480 per outlet, so multiply that by the number of outlets in your home to arrive at a rough estimate. However, this is for simple projects with no obvious issues with the system. Your final bill could vary widely from your calculations.

A light switch can stop working for several reasons. Typical causes include a blown fuse or tripped circuit breaker, both of which shut off power to the switch. Worn-out or faulty internal switch components can also prevent it from functioning properly. Loose or disconnected wiring within the switch or electrical box is another frequent issue. Additionally, switches may fail due to age, excessive use, or physical damage. In some cases, problems with the light fixture or bulb itself might be mistakenly attributed to the switch.

Yes, although there are different types of electricians, they must be licensed, certified, and in most cases insured. States have different requirements for electrician licensing and certifications. In some cases, there may be licensing requirements at the local level, but not the state level. It’s always a good practice to confirm requirements with your local municipality. If licensing is not required in your area, you may pay more for a licensed electrician with experience than one who is not licensed or certified, but you’re likely to get a better end result for your project.

As you browse our pro listings, take note of the “Angi Approved” badge. Angi Approved businesses meet our standards for certification which include: 

• The owner, principal, or relevant manager passed a criminal background check

• Required to have applicable state and local licenses

• Maintain an average star rating of 3.0 or better on our network, if they have at least one review

• Paying to advertise their services

• Meeting any other eligibility criteria required by Angi

Keep in mind licensing is different from certifications. A license is a legal requirement to operate a business, while certifications are voluntary.