"Ed Riley is extremely knowledgeable about what causes lighting and how to protect from it. He explained to me which and how structures develop static electricity that lead to lighting discharges in a way that the physics made sense to me. They were also reasonably priced and kept their word. Definitely recommend them."
"Jim for Donhohues Lightning Rods installed the lightning rod system in my home. When the work was done I was very happy as their installer came as per promised time, and perform the work. Before giving them the work Jim completely sold me their work ethics, quality, and service. There was a minor issue and his team took complete ownership of this issue and talked to me in detail. They provide a very good explanation to satisfy me. I am a happy customer."
"Excellent! Exceeded my expectations! Marty is a true professional and the installation went perfectly. I unequivocally recommend Hamilton Lightning Rods."
"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
Our Company provides a one-stop solution for all of your voice, internet, and telecom needs. Leveraging the Cloud we provide your Office state-of-the-art telephones for little or no upfront cost striving to keep your monthly costs the same. Sound too good to be true? Give us a call and we will show you how.
"Jim Benton of Country Boys Electric came out the day after my call for a bid. He walked through our shell of a log cabin in the woods, was very thoughtful, made many great suggestions about where to put lights and plugs, described the work they would do and within a few days we has his written bid. We liked and trusted Jim immediately and they started to work in a few days. His workers were very professional, arrived on time, worked well with us. They did all the wiring and then had to wait about a month for the sheetrock and painters to do their work. We called them back and they were ready to install lights and fans and finish the job. We were so please with their work. They were very reliable and on time, even though they had to drive 40 miles from their shop to our place each day.We would highly recommend them to others. "
"Robert Rodriguez arrived 1:00 PM, April 12, 2017 to diagnose problems w our security lights. He switched out sensors, bulbs for two rather dated lights and installed a junction box where he found exposed wires. He's an excellent electrician and highly recommend him to anyone who needs electrical work performed in the Rio Grande Valley."
"My house was under construction. and had already gotten struck by lightning so time was critical as I knew it could happen again. I have a home with tall roof peaks and built on a hill. They came out quickly and started right away and their prices were way less than the other company s. I will use them again when my barn is constructed."
"This is my first time to hire an electrician as I did the work myself but now I am 80 and it is time I get some help. Arnulfo was a quick study as to what I wanted done and he was able to do it the way I would have. I think it was worth it but electrical work is expensive. I am happy and have less anxiety about our house burning down."
To reduce AC startup power for a whole-house generator, install a soft start kit or hard start capacitor, which lowers the initial surge by gradually ramping up the compressor. Using a smart load manager can also help by staggering startup loads, preventing a system overload and future costly repairs.
Usually, a light switch goes bad due to normal wear and tear. Light switches are mechanical devices with internal moving parts. These parts make contact with each other, and, over time, the friction can wear them down, causing the switch to feel loose, arc, or fail to operate.
Yes, a bad switch can cause other outlets not to work. If the switch is part of a circuit that controls multiple outlets, a fault in the switch can disrupt the entire circuit. It can happen if the switch is wired incorrectly, has a loose connection, or is damaged. Fixing or replacing the faulty switch can often restore power to the affected outlets
The color of your cable will help you to identify its function. In the U.S., the National Electrical Code (NEC) designates the color code for electrical cables. “Hot” cables are black, red, and blue. In cases of higher voltage lines, orange might also be used to indicate a hot cable. White or gray indicates a neutral, and green or green with a yellow stripe indicates a ground.
If you need to run a wire from the meter to the breaker box, start by turning off the power using the main switch to avoid injury risks from live wires. Then, locate the ground wire from your meter and connect it to the ground bar of the breaker box. Connect the neutral wire using the same method to improve your circuit efficiency.
Next, locate the hot wires running from the main switch to the meter. To connect them to the correct terminals from meter to breaker, unscrew the nuts of the breaker hotwire terminals, insert the positive hotwire, and ensure it’s firmly attached. Finally, secure the wires with electrical tape and wire tie cables before re-securing your breaker box. Keep in mind that this process can be dangerous, so don’t hesitate to hire a local electrician.
The Hebbronville, TX homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
