Get matched with top fencing pros in Fairmount, TN

A board on board fence is a type of privacy fence that uses overlapping vertical boards to keep onlookers from seeing into the fenced yard. Typically made of wood, board on board fences are more expensive than other privacy fences because they use more materials and require more complex construction.

Making a homemade pallet fence involves marking out the fence line and leveling the ground along it. Then, install metal or wooden fence posts that you slide the pallets on top of (two posts per pallet). Fasten them together with 2x4 wood boards that act as an extra layer, keeping the pallet fence secure.

Fabricating an aluminum fence costs about $4,350 on average, ranging from about $2,450 to $6,500. Your fencing costs can run as low as $750 or as high as $11,000 or more, depending on the fence's size, complexity, and geographic location. You should consider additional cost factors including the thickness of the aluminum, height of the fence, necessary permits, and custom colors.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.