Top-rated septic tank pros.

Best septic tank pros near Worthing, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your septic tank service project in Worthing, SD?

Select your specific project to find the pro for you.

Top-Rated Septic tank pros in Worthing - Updated Nov 2026

Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,689
)
Septic System - Install or ReplaceSeptic System - Install or Replace - For BusinessSeptic System - Repair+3 more

Serving Worthing, SD and surrounding areas

In business since 1971

Credit card accepted

"The technician emptied the freezer, which was in the basement, to work on the part that needed repair. Then he neglected to put anything back into the freezer, including a turkey I had bought for Christmas and a rack of ribs. Two days after he left, I went out of town for two weeks. The turkey actually exploded and spewed its liquid all over everything, which had to be discarded. I let AHS know and they couldn't even bother to call me or follow up on this. I'm considering not renewing my contract with them because of the quality (or lack thereof) of many of the providers they send."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Septic Tanks FAQs, answered by experts

The lifespan of your well casing depends mainly on the material it’s made from. Stainless steel and galvanized steel casings are designed to withstand the pressures and environment of deep-water wells but are susceptible to corrosion. Most steel casings last from 20 to 35 years, on average. PVC casing is highly durable and, if used correctly, can last up to 50 years.

Soda, coffee, and other soft drinks are highly acidic. This affects the pH in septic tanks, causing them to require more frequent pumping. However, a vast majority of people don't need to worry about septic system disruption. Pouring out the occasional flat soda doesn’t affect septic systems to the same degree as the high-volume dumping from restaurants and convenience stores.

How deep your septic system needs to be into the ground depends on several factors. In extremely cold environments, the tank needs to rest below the maximum frost line, which can be up to six or eight feet deep. The standard burying depth for most systems is between a few inches and four feet below ground level. Depth can also depend on the slope of the landscaping and other property variables. 

The main difference between a mound septic system and a conventional one is that the drain field in a mound system is built up into a mound composed of sand and gravel to increase the filtration time the wastewater sees before it is returned to the aquifer. There’s also a significant cost difference, with mound systems typically costing far more than standard septic systems.

The pressure in a well pressure tank should be set 2 to 3 PSI below the pump's cut-on pressure. The cut-on pressure is the lower number in the pressure setting (e.g., the '30' in 30/50 PSI) and is the point at which the pump starts. The cut-out pressure is the higher number, where the pump stops.

For example:

  • If your pressure switch is set to 30/50 PSI, the tank pressure should be 27-28 PSI.

  • If your pressure switch is set to 40/60 PSI, the tank pressure should be 38 PSI.

Common pressure settings for household applications include 20/40, 30/50, and 40/60 PSI. The difference between the cut-on and cut-out pressure is typically 20 PSI.

The Worthing, SD homeowners’ guide to septic tank services

From average costs to expert advice, get all the answers you need to get your job done.