Get matched with top concrete resurfacing pros in Presho, SD

Concrete blemishes such as chipped steps or small cracks are fixable with patching. For bigger jobs, including driveway repair and cracks wider than a 1/4 of an inch, patches will only serve as a temporary fix. Resurfacing is ideal when the surface is showing more widespread wear—like if it’s pitted, rough, or has lots of cracks. Resurfacing gives your concrete a fresh, like-new appearance without needing a full replacement.

When the concrete is severely cracked, sinking, or otherwise structurally unsound, replacing it might be your best option. Replacement ensures the safety and longevity of the surface in this case.

Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.

Mix the resurfacer into a sticky mixture. The consistency should look like mashed potatoes. Use a squeegee to push the resurfacer across the pitted area and smoothen the surface with a cement trowel flush. Make sure you protect any expansion joints with a weather strip. Alternatively, cut out any resurfacer that touched the joint once the mixture begins to harden.

Yes, you can pour new concrete over an existing concrete patio. This process, known as resurfacing, is a common repair method used by professionals. For the best results, ensure the old concrete surface is clean and free from debris. The new layer of concrete should be at least three to four inches thick and include reinforcement materials, such as fiberglass fibers or wire mesh, to prevent cracking and spalling. With proper technique, a resurfaced patio can last for 15 to 20 years.