Get matched with top door pros in Mitchell, SD

Permits are required when carrying out any structural work, so in most cases, you will need a building permit to cut through a concrete block wall to install a door. If you have specific questions about your project or need to obtain a permit, contact your municipal building department or ask your contractor for advice.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

To choose the best door, start by pinpointing its most important job in your home, then choose the material and style based on that function. Simply put, there’s a world of difference between what an interior bedroom door and driveway-facing entryway door do for your home. Thinking about your door's purpose first, then its look and style, will help you make the right choice and stay on budget.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.