Get matched with top door pros in Madison, SD

A prehung door is a door that comes ready to install, already mounted in its frame with hinges and stop molding included. Because everything is factory-aligned, installation is quicker, more precise, and convenient, as you don't need to drill or align the hinges yourself. This makes it a smart option if your current frame is damaged, uneven, or if you're working on a new build. Installation involves fitting the entire unit into the rough opening, shimming and leveling it, and then securing it. If you are replacing an existing prehung door, the process is even simpler, often just requiring you to swap the old unit for the new one and secure it with a few screws. Prehung doors typically cost only slightly more (around $20) than a door slab alone, making them an efficient choice.

French doors usually have two handles, with one for each door. However, some French doors only include a single door adjacent to a panel of glass that doesn’t open or close. In that case, you’d have a single handle on the door side and no handle on the stationary side.

A door sill is the horizontal part of the door frame at the bottom, while a door jamb consists of the vertical parts of the frame on either side. The door sill serves as a threshold, sealing the bottom of the door, while the door jamb provides structural support and houses the hinges and latch. Both are essential components of a door frame, with the door sill acting as a transition point and the door jamb providing stability and functionality.

You want plenty of room between your pre-hung door and the framing in your wall to allow for shimming to get the door into the perfect position, so aim for about 1 inch on the top and both sides. That means you should make your rough opening about 1 inch taller and 2 inches wider than your pre-hung door. You’ll then use shims to stabilize and level the door before installing it.