Get matched with top plumbers in Gregory, SD

While frozen pipes will eventually thaw on their own as temperatures rise, it is not safe to let this happen unattended. As the ice blockage melts, water can become trapped, building up extreme pressure within the pipe. This pressure can cause the pipe to burst, leading to severe water damage, costly leaks, and serious damage to your plumbing system. It is best to handle frozen pipes as quickly as possible. If you do not see any visible damage, you can try to slowly warm the pipes by increasing warm air circulation or applying warm towels. However, if you spot any leaks or damage, you should call a plumber immediately. The best course of action is always to take preventative measures to stop pipes from freezing.

If your toilet won’t stop running, you might have a bad fill valve. This may be the case if the valve has calcium or debris buildup, is cracked, or shows visible signs of wear and tear. A bad fill valve may also be the culprit if you’ve already checked the flapper and chain and adjusted the fill height to no avail.

Ensure there’s a way to flush out excess water from the generator. There will either be a bin you can pull to dump water down the drain or a simple button if your generator is hooked up to a drainage pipe. 

 Ideally, you’ll want to drain after every shower, but there will be a mark on the generator that shows how much water it can hold. Failing to drain the generator can lead to automatic shut-offs or damage.

To measure pipe size, you can use a ruler, a soft tape measure, or a caliper. You can find a special pipe caliper that has iron or copper pipe sizes already marked. Rulers work if the end of the pipe is exposed. If your pipe is still attached to the plumbing, you’ll need to go for a soft tape measure or caliper.