At Mold Test Company, we take great pride our experience, expertise, quality and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer a professional manner. Our reputation is based on service, safety and quality, regardless of how large or small the job.
"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."
We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business! Book with us online or feel free to give us a call today!
\n
\n
David Ferguson's construction business is dedicated to quality and outstanding customer service. Our job is to provide you with quality service at a great price. Please don't wait call us today.
Mold Testing and Remediation FAQs, answered by experts
PVC is not considered a hazardous waste in most areas, but regulations vary by location. If in doubt, you should contact your local sanitation department to confirm. The Center for Biological Diversity (CBD) has been working to get PVC classified as hazardous waste, so it’s possible that it will be considered as such in the near future. If it is, disposing of PVC will require the use of a hazardous waste disposal facility or transporter in your area.
A mold inspection costs an average of $660, with a typical range between $300 and $1,025. However, costs can be as low as $150 or as high as $2,800 depending on several factors. These include the size of your home, the type of mold, the extent and accessibility of the affected area, your location, and the number and type of samples required. Hard-to-reach areas like air ducts, crawl spaces, and wall cavities can increase the cost. Specific tests have different prices; for example, swab testing typically costs $200 to $300 per area, while more extensive air testing can range from $250 to $700. A thorough inspection is crucial for determining the scope of the problem and identifying the best remediation method.
If you notice water accumulating in your vent due to a roof or plumbing leak above your ductwork, it's essential to promptly identify the source of the leak and undertake any required repairs without delay. Such leaks have the potential to swiftly result in water damage within your home, ultimately leading to mold and mildew concerns.
Mold is a blight on your home but over time, can be an extreme health risk, especially for immunocompromised individuals. Depending on the type of mold you’re dealing with, you could even experience neurological symptoms, or in extreme cases, you can be hospitalized. Even a tiny speck of toxigenic mold can cause a whole slew of very serious health issues. Deal with any mold issues immediately.
No, a dehumidifier does not actually remove mold. It only reduces the moisture in the room, which mold needs in order to grow. If you already have mold, you’ll need to do a deeper cleaning or call a pro to remove the existing mold first.
The Gregory, SD homeowners’ guide to mold testing and remediation services
From average costs to expert advice, get all the answers you need to get your job done.
The cost of a mold inspection might seem high, but it’s one of the best investments you can make for your health and home. Read on to learn cost-saving tips.
Figuring out how to test for mold in your home is important. Mold testing can offer peace of mind and lets you know if it’s time to call a pro. Learn about mold testing processes in this guide.
When is mold remediation required at your home? We can help you decide whether the musty odor or the patch of mold you’re experiencing requires a pro’s help.
There's an excellent reason why you should avoid going with the same company for mold testing and mold remediation. Learn why different companies should handle these tasks.
