Get matched with top locksmiths in Castlewood, SD

Yes, as long as it’s thick enough for the deadbolt. Most interior hollow core doors are at least 1 1/2-inches thick, which is usually the minimum requirement for a deadbolt. You’ll want to find the lock block first before installing. Also, most hollow doors require additional reinforcement for locks, such as a reinforcement plate or plywood block.

It’s possible, but depends on the design of your lock. Some door locks that lack a keyhole do boast a small hole on the exterior handle or knob. This hole’s primary function is to allow water to drain out of the lock, in addition to giving homeowners an easy spot to insert lubrication. However, you can typically use a paperclip in this pinhole to unlock the door by manipulating the mechanism inside. 

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.