"I had a bit of trouble with my molding around the doors vs how the system was designed. The tech guy hung with me for 39 minutes until it was perfect. I called customer service a couple times after that with questions that came up. The customer service team are professional and knowledgeable."
"The gentleman was very knowledgeable and got the job done in a timely manner,an also downloaded my printer onto my computer for me.Greatly appreacited it."
"Hal's work is top-notch but I grew increasingly frustrated with the timing and inconsistency of his work habits. His was one of several estimates I received and basically he said he would beat any estimate I received. The difference is that everyone else was going to use cedar and he only works with pressure-treated Southern yellow pine, which is less than half the cost of cedar. I was unsure of the durability and longevity of that product so I did extensive research online. Still unsure, I drive around the Twin Cities to see other jobs Hal did that gave stood the test of time and I decided to move forward. Clearly, the way he builds his fences require considerably more manual labor than those built with cedar posts and pickets so essentially instead of paying for the higher cost of cedar, you pay for increased labor costs. Unfortunately, Hal isn't as going as predicting when he will get jobs complete as he is completing them well. He was over a month late in getting started and I repeatedly had to call him to inquire about the delay. It was quite frustrating but since I didn't absolutely need the fence done by a certain date, I decided to practice patience. Once he finally started, most days he and his helper only worked 4 hours so the project dragged on far longer than I thought it would. Admittedly, there were a couple of weather-related days but other times when it was a perfect day, they wouldn't show up and I would give no idea when they were coming again. After I told him I really needed to have him be more communicative, he was and within a short time after that conversation, he completed the fence. The fence is beautiful and appears very sturdy. We'll see how it withstands time and weather but for now I am very happy with it. Hal does beautiful work but if you are on a strict timeline I would not recommend working with him. If you are flexible and don't mind putting more effort into communication, he is a great person to work with. "
"Very professional. Pricey but high quality and excellent customer service. The company and all service personnel and customer service are ALL in the United States of America. The system is easy to use and any questions are answered promptly and completey. "
SkyCover provides a total home security and automation solution that is 100% wireless with 100% cellular monitoring and no long-term contract. SkyCover monitoring includes interactive services for remote system control and access. Trust SkyCover to deliver with risk-free 30-day trial, free shipping and no long-term contract monitoring.
"Their warranty cost and service prices are more expensive than a lot of other options. They hire out to contractors with terrible ratings and you're stuck with whomever they assign you to."
Door locks should be changed roughly every seven years. The average lifespan of a door lock is seven to 10 years, so it’s best to err on the side of caution and change them early, especially if they are showing signs of wear and tear. Examples of deterioration include visible rust and difficulty opening or closing the door. Some locks can work safely beyond 10 years, but it depends on how often they are used and whether they are exposed to damaging environmental conditions like precipitation or extreme temperatures.
Most door knobs can be removed with a Phillips or flathead screwdriver. If you don’t have either of those available, a paper clip or small pin can sometimes work, but the extra effort may not be worth a quick trip to the hardware store.
When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.
Yes. Most deadbolts purchased from a home improvement store include a step-by-step installation template that is easy to follow, even for novice DIYers. One of the most important steps for successful deadbolt installation is having the proper tools to start with and carefully measuring prior to any attempts at installation.
It is best to use a dry lubricant, such as a Teflon-based option, for door locks. Unlike popular oil-based lubricants, dry lubricants leave a non-stick, water-repellent coating that does not attract dust, dirt, and other debris. Using an oil-based lubricant can cause these particles to build up inside the lock, making it difficult to operate or even damaging the internal mechanism. You can find dry lubricants, some of which are made specifically for locks, at most hardware stores.
The Lake Benton, MN homeowners’ guide to locksmith services
From average costs to expert advice, get all the answers you need to get your job done.
Wondering how much a locksmith costs? Discover locksmith prices, key cost factors, and tips to save on home lockout, rekeying, and installation services.
No one wants to get locked out, and locksmith scams make the situation even more unpleasant. You can find legitimate locksmiths by checking things like their phone number, car, and prices. Find out how to pick reputable locksmith companies here.
Need new locks or locked out? You probably have questions about finding a reliable locksmith. This guide can help you hire a professional you can trust.