Get matched with top window and door contractors in Honea Path, SC

The cost ultimately depends on size, but roughly, the most popular screen materials will set you back anywhere from around $0.25 to over $25 per square foot. Fiberglass and aluminum are usually less expensive at around $0.25 to $0.70 per square foot. Solar screens cost about $7.50 to $15 per square foot, while security screens range from around $10 to $25 per square foot.

If you’d rather repair your screen door mesh than replace it, you can patch it. Purchase a mesh patch for screen doors with small holes or tears, especially if the mesh is pretty new. Hardware stores and websites sell mesh patches that are easy to apply with an adhesive or a warm hair dryer. Keep in mind that repairs won’t look as aesthetically pleasing in most cases as a full replacement. 

Whether you should repair or replace a screen door depends on the type and extent of the damage. It is easy and economical to repair a small tear in the mesh using a widely available DIY patch kit. However, if there are large tears, multiple damaged spots, or if the screen is made of a specialized material, replacing the entire screen mesh might be a better long-term investment for a tidier appearance. You should also consider the condition of the frame; if the frame itself is damaged, it's likely time to replace the entire door. Other factors to weigh include whether you want a new style or need a more durable door.

The screen on many screen doors is held in place by screen spline. Screen spline is typically a thin vinyl tubing that fits into the groove of the door’s frame and holds the screen in place. To install the spline on a screen door, you’ll need a spline roller—a tool that presses the spline and screen into the door’s narrow groove. Note that old spline can crack and break, so replacing your screens is a good time to replace the spline, too.