How do I choose a metal fabricator?

• <div><p>Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.</p><p>Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.</p></div>

What is the best way to cut plexiglass?

• <div><p>This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes. </p><p>The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use. </p></div>

Get matched with top welders in Easley, SC

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: How much does it cost to hire a metal fabrication professional?

• <div><p>Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Easley, SC?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Easley, SC

*The Angi rating for Welding companies in Easley, SC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Easley, SC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on January 21, 2026

Reviewed in January 2026
Work was done professionally. I would recommend this contractor to others. Job well don.
ELI THE HANDYMAN SPECIALIST LLC
Request a quote
Reviewed in December 2025
After hiring another contractor from this website, he had half done the job. This contractor/landscaper did just what I needed to be done in order to make my fire pit look good….
N&L Landscapes, LLC
Request a quote
Reviewed in October 2025
I originally was doing my deck .They did such a great job that I had my fence done a few weeks later. William and his team were extremely professional.He listened to what I wanted and made it happen. I will definitely use TJ 's General Contractor for future projects
TJ's General Contractor LLC
Request a quote
Reviewed in August 2025
Very happy with the service provided by Polar Plumbing. Rusty is very professional and prompt. Would highly recommend his service.
Polar Plumbing
Request a quote
Reviewed in May 2025
Very professional. Knew hus craft and performed it well. Would definitely use again.
Rapid Appliance Solutions LLC
Request a quote
Reviewed in March 2025
Very professional and courteous, Blaine and his associate knew exactly what to do on the project I requested. My area looks very nice with the limbs removed. They cleaned up all tree debris and I will request their service again. Thank You!
Flavell's Land Management, LLC
Request a quote
Reviewed in January 2025
He did a great job on the repairs I needed done and was punctual as well as very professional to deal with. I would highly recommend his services to anyone looking for any type of weld repairs or installations.
Next Level Welding & Fabrication LLC
Request a quote
Reviewed in June 2024
Very professional, timely & fast. This company is good repairing, assembly
Delano Services, LLC
Request a quote
Reviewed in September 2023
I was extremely pleased with the work that was done. The quality of the work was exceptional and it was done in a professional and timely manner...the frame on my 92 Jeep wrangler yj was rusted with holes and the frame was twisted. Charles at PLS was able to restore it to a very safe and like...
PLS Construction and Industrial Maintenance
Request a quote
Reviewed in June 2023
This is one of the best company I highly recommend I’m a contractor he did so many work for me one of the best framing workers
ABRAHAM'S FRAMING LLC.
Request a quote

Find Welders in Easley

Jackson Welding

5.0(

)

Serving Easley, SC and surrounding areas

"Work was top-notch!! Did what was asked and more!"

Recommended by100%of homeowners

Request Quote

Atlantic Welding Staffing, LLC

3.5(

)

Serving Easley, SC and surrounding areas

In business since 2018

Free estimates

"They are a good company with wonderful employees, they did what they said they were going to do, they did a good job."

+30

Recommended by100%of homeowners

Request Quote

Upstate Tool & Metal Works LLC

New to Angi

Serving Easley, SC and surrounding areas

In business since 2008

Free estimates

Credit card accepted

We provide mobile and shop welding for your projects. Our services cover commercial, residential and farms welding projects. Emergency services are anvailable as well. We cover upstate SC, NC & GA. Our company was established in 2008 then restructured in 2023.

Request Quote

Sean Miles Welding

New to Angi

Serving Easley, SC and surrounding areas

In business since 2021

Free estimates

Offers commercial services

Sean Miles Welding is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have a year of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!

Request Quote

Sparks Fly Welding

New to Angi

Serving Easley, SC and surrounding areas

Free estimates

Emergency services offered

Warranties offered

Providing mobile welding services and fabrication \nWelding repairs and new installation

Request Quote

Tomlin Welding

New to Angi

Serving Easley, SC and surrounding areas

In business since 2022

Free estimates

Credit card accepted

J Fab is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests, and make their concerns the basis of our business.\n\n

Request Quote

FITZ WELDING SERVICES

New to Angi

Serving Easley, SC and surrounding areas

In business since 2024

Free estimates

Credit card accepted

FITZ WELDING SERVICES is committed to excellence in every aspect of our business. We uphold a\nstandard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is\nthe quality of service we bring to our customers. We have accurate knowledge of our trade\ncombined with ability is what makes us true professionals. Above all, we are watchful of our\ncustomers' interests, and make their concerns the basis of our business.

Request Quote

Alfredos Welding

New to Angi

Serving Easley, SC and surrounding areas

In business since 2001

Free estimates

Offers commercial services

Went to school for welding

Request Quote

Farmers Welding Service

New to Angi

Serving Easley, SC and surrounding areas

In business since 2017

Free estimates

Credit card accepted

We are a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. We offer a variety of services that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction! \n

Request Quote

The Crimson Forge

New to Angi

Serving Easley, SC and surrounding areas

Free estimates

Offers commercial services

The Crimson Forge is a custom welding and fabrication shop. We specialize in niche, precision-driven metalwork that combines functional strength with artistic design. Core capabilities include TIG and MIG welding across carbon steel, aluminum, and (soon) stainless steel, with emphasis on custom projects such as furniture, gates, railings, architectural features, and decorative pieces.

Request Quote

Showing 1-10 of 15

Welding questions, answered by experts

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.

Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes.

The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use.

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

The Easley, SC homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Metal Awning Pro
Find the best metal awning professional for your project. Learn what qualifications to check, questions to ask, and how to hire a reputable pro.
Jouviane Alexandre
•
May 3, 2026May 3, 2026
What is a Stair Stringer? Everything You Need to Know Before You Build
Stair stringers support every step you take. From wood to steel, open to closed—explore the different types, materials, and whether to DIY or hire a pro.