Get matched with top roofers in Kingston, RI

Yes, a tile roof will increase the value of your home more than an asphalt shingle roof. Not only do tile roofs look nicer and add more to your curb appeal, but buyers will understand that roof tiles last longer than most other materials, so they can expect minimal maintenance and a long roof lifespan after closing, which often means they’ll be willing to pay more for a home with this roof option.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Architectural shingles typically last between 20 and 30 years, though most homeowners should plan on replacing them every 20 to 25 years. While some manufacturers offer warranties for 30 to 50 years, especially for extreme weather, achieving such a long lifespan is rare. The actual lifespan can be shorter in areas prone to strong winds, hailstorms, or other extreme weather. It is recommended to replace your roof before it reaches the end of its life to reduce the risk of roof failure, leaks, and costly property damage. Scheduling regular roof inspections will help you determine your roof's remaining life and identify the best timeline for replacement.

You can install solar panels on a flat or pitched roof, but keep in mind that they will need to rest at a 30- to 50-degree tilt for optimal sun absorption. It costs more to install solar panels on a flat roof because you will need to install a framing system and likely hire a structural engineer. If your roof has a pitch of more than 40 degrees, it may not be a good candidate for solar panels.