Get matched with top fencing pros in Three Springs, PA

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

Typically, a fence requires one to two coats of stain. The exact number can vary depending on the porosity of the wood. For specific guidance, it's best to check the manufacturer's instructions. After applying the first coat and letting it dry completely, you can assess the finish. If it appears patchy, uneven, or you want a more saturated color, a second coat is recommended. An extra coat can also help cover lap marks.

You should stain both sides of your fence to get the full benefits. Fences often fall along property lines, so you may want to save a buck by leaving your neighbor’s side in the dust. If you do that, all you get is a slightly better view. Moisture and UV rays can still sneak in through the side that’s unpainted or worn down and damage your fence. Rot and rust will spread, even if you can’t see it from your side of the lawn.

A metal fence can last for over 30 years if maintained correctly, though the exact lifespan varies by material. For instance, chain-link and aluminum fences can function well for 25 to 30 years, while corrugated metal fences may last up to 60 years with regular maintenance. The lifespan can be shortened by harsh weather, abuse, or lower-quality materials. Galvanized metal tends to last longer due to its protective barrier, whereas sheet and corrugated metal may rust faster than solid pieces.