Top-rated structural engineers.

Get matched with top structural engineers in Marion Center, PA

There are 1 highly-rated local structural engineers.

Need a pro for your structural engineering project in Marion Center, PA?

Select your specific project to find the pro for you.

Find Structural engineers in Marion Center

Avatar for Groundworks

Groundworks

5 Industrial Road, Building A
4.52(
209
)
Approved Pro

Groundworks

5 Industrial Road, Building A
4.52(
209
)
Approved Pro
Customers say: Super punctual
41 local quotes requested
13 years of experience

Since 2012, Groundworks has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs. Our top priority is providing high-quality home repair solutions and personalized service across Pittsburgh. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or crawl space. PA158514 (PA)

"We had our basement waterproofed by Baker's. It's been bone-dry since. We did have one piece of equipment fail within a month of the installation, but it was a third party dehumidifier that was just a dud I guess, no fault of Baker's. I texted the project manager about it on a Sunday. I expected a response the following week. He got back to me within the hour. The equipment was removed and replaced within a couple days. Everything great since. I would highly recommend Baker's, but specifically our project manager Nathan Goddard and the head guy on site Daylan. Can't remember his last name, but he's got a long beard and did a great job. Thanks to both of them and the rest of the guys."

David L on March 2025

Since 2012, Groundworks has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs. Our top priority is providing high-quality home repair solutions and personalized service across Pittsburgh. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or crawl space. PA158514 (PA)

"We had our basement waterproofed by Baker's. It's been bone-dry since. We did have one piece of equipment fail within a month of the installation, but it was a third party dehumidifier that was just a dud I guess, no fault of Baker's. I texted the project manager about it on a Sunday. I expected a response the following week. He got back to me within the hour. The equipment was removed and replaced within a couple days. Everything great since. I would highly recommend Baker's, but specifically our project manager Nathan Goddard and the head guy on site Daylan. Can't remember his last name, but he's got a long beard and did a great job. Thanks to both of them and the rest of the guys."

David L on March 2025


Avatar for NEC Solutions, LLC

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro
Customers say: Quick response
15 local quotes requested
10 years of experience

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025


Carl J. Massini, P.E.

Main Street
No reviews yet

Carl J. Massini, P.E.

Main Street
No reviews yet
36 years of experience

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.


Boyle Engineering, LLC

130 Farm Ln
5.00(
6
)

Boyle Engineering, LLC

130 Farm Ln
5.00(
6
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Boyle Engineering, LLC is a family owned and operated civil engineering firm based in Central Pennsylvania. We offer Structural Engineering (bridges, small buildings, decks, repair details, etc.), Geotechnical Engineering (retaining walls, foundations, steep slopes, etc.), Permitting, and Construction Engineering (demolition plans, earth shoring, structure shoring, etc.). Our staff has a wide variety of project experience from large bridges to residential beam repair. Bottom line, if you need a Licensed Professional Engineer for new construction, addition, remodel or concerns with an existing home, business or retaining wall, contact us.

"The service went very well. They were on time, very polite and they were very professional."

Ed C on August 2021

Boyle Engineering, LLC is a family owned and operated civil engineering firm based in Central Pennsylvania. We offer Structural Engineering (bridges, small buildings, decks, repair details, etc.), Geotechnical Engineering (retaining walls, foundations, steep slopes, etc.), Permitting, and Construction Engineering (demolition plans, earth shoring, structure shoring, etc.). Our staff has a wide variety of project experience from large bridges to residential beam repair. Bottom line, if you need a Licensed Professional Engineer for new construction, addition, remodel or concerns with an existing home, business or retaining wall, contact us.

"The service went very well. They were on time, very polite and they were very professional."

Ed C on August 2021



Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S




PENNINGTON SPECIALTY CONTR CO

2988 RUSTIC LODGE RD
No reviews yet

PENNINGTON SPECIALTY CONTR CO

2988 RUSTIC LODGE RD
No reviews yet
63 years of experience

Pennington Specialty Contracting is a full-service residential and commercial provider offering construction services with a reputation for excellence. Our commitment to each project has allowed us to exceed our client's expectations in every aspect of the job. With an approach of operating on a flexible business plan, we tailor every job to meet the needs of our clients as they change throughout the project lifecycle. Pennington Specialty provides a wide variety of services from Residential and Commercial Construction to Pre-Construction Planning and Subcontractor Services. We are a one-stop-shop for all of the construction needs for your project.

Pennington Specialty Contracting is a full-service residential and commercial provider offering construction services with a reputation for excellence. Our commitment to each project has allowed us to exceed our client's expectations in every aspect of the job. With an approach of operating on a flexible business plan, we tailor every job to meet the needs of our clients as they change throughout the project lifecycle. Pennington Specialty provides a wide variety of services from Residential and Commercial Construction to Pre-Construction Planning and Subcontractor Services. We are a one-stop-shop for all of the construction needs for your project.


kieffer construction

246 Hudsondale St
1.00(
1
)

kieffer construction

246 Hudsondale St
1.00(
1
)
36 years of experience

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

Showing 1-10 of 16
Structural Engineering questions, answered by experts

Whether you’re building a new home or building an extension on your existing property, you will likely need both a structural engineer and an architect. A structural engineer will determine what loads your foundation and framing can safely handle, and an architect will draw plans according to those structural calculations to simplify the building process. You can start by contacting a structural engineer near you, as many work alongside architects and can get all of the prep work done at once.

It depends on the bank and the extent of the issue. Some banks will lend against homes with minor foundation damage, but most won’t if the issue is structural since the home acts as collateral for the mortgage. Banks that offer renovation loans might still finance a home with structural problems. More minor issues like settling cracks and intermittent problems with humidity are unlikely to stop a bank from financing.

Most structural engineers offer free quotes, regardless of the size of the job. For simple inspections when buying or selling a home, engineers typically charge a flat fee that may be based solely on your home’s foundation type and square footage. For larger projects, like new construction and major home renovations, an engineer will either perform an analysis of your project and site and provide you with a formal estimate, or they will do a more in-depth assessment and in-person site inspection before coming up with a per-hour or per-project cost estimate. In most cases, the estimate is free.

A split-level home is one that has several staggered floors connected by short staircases, while a split floor plan separates the primary bedroom from the rest of the bedrooms. Split floor plans are most often found in single-story homes, while split-level homes are always at least two stories.

Precast concrete can be reinforced with rebar, wire mesh, or other materials to improve its strength and add stability. Precast concrete for large construction projects is often pre-stressed as well for greater structural strength. Reinforced concrete is durable and strong, making it an ideal choice for many construction projects.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Marion Center, PA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.