Get matched with top fencing pros in Clarksburg, PA

There are different types of pet fencing available to keep your furry family member safe:

• Chain link fencing is an affordable but not visually appealing option.

• Vinyl panel fencing is less easily damaged than wood. 

• Wood fencing is customizable but requires regular maintenance. 

• Metal iron fencing provides a sleek look but doesn’t block your pet’s view. 

• Electric fencing eliminates the need for a traditional fence, but it could be painful to your pet. 

• Picket fencing adds to your curb appeal but won’t contain most pets. 

• Brick or stone fencing stops pets from digging out of the yard but costs more.

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust. 

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again.