Get matched with top drain pipe installers in Bellevue, PA

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

You can try several easy methods to unclog a drain, one of the easiest and most effective of which is to use a mixture of baking soda and vinegar. This will help dislodge and dissolve the clog to move it down the drain pipes. Pour 1/2 cup baking soda into the drain, followed by 1/2 cup of white vinegar. Dump several cups of boiling water (or hot water if you have PVC pipes) into the drain and let sit for up to one hour. Run hot water to clear the drain.

Snakes can occasionally enter homes through shower drains, although it’s quite rare. This can happen when they follow sewer pipes or accidentally find their way into plumbing systems. To minimize the risk, consider installing drain covers or stoppers on your shower drains. Always keep drains closed when they’re not in use, especially in areas where snakes are known to be active.

Yes, flushing a clogged toilet can make it overflow. While flushing the toilet may push enough pressure through the system to dislodge the clog, this is unlikely. Your best bet is to use a plunger and hope the suction can break up whatever is blocking the pipe. If this doesn’t work, use a plumbing auger or call a pro to help.