Oregon Coast Blinds is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.
\n
Nathan Henry specializes in high-quality home repair and carpentry services for homeowners who value skilled workmanship and reliable results. Each project is approached with care, clear communication, and attention to detail, whether it’s a small repair or a more involved improvement. The focus is on doing the work correctly and cleanly—no shortcuts—so repairs last and your home is left better than it was found. Homeowners choose Nathan Henry for professional service, thoughtful execution, and work they can feel confident in.
"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
"It was okay but the woman who came out was a little bit too concerned about speaking her own mind and I do not think that the time frame was long enough for her to really get a grasp of what it was that we were looking to do. She had some good ideas but it was not enough to convince me to go further and purchase an additional time, however, we had a particularly challenging project. It was not like it was a simple little thing and I threw a lot at her. She was not particularly prepared when she came so we had to spend part of the time getting her prepared. I had sent her an email in advance with the pictures and everything and said, "Here, so that you are going to be thinking about this before our call." And when she got on there, she had not really done that. So, that took some of the time for me to go and say, "Okay, take a look at the email. Here are the pictures." She did not come ready to go with advice and that was a little bit disappointing. The advice that she had was good but it did not solve my problem and it did not convince me to purchase additional time. I was not unhappy with her. It just did not wow me. It was what it was and it was fine. She came out within the time frame that we purchased the deal because we had just purchased the house. We were living in North Carolina and we purchased the house in Florida. We moved on December 2nd so it was between the date that we purchased the deal and December 2nd because we had to talk to her about what we wanted to change about the house before we moved. Ours was not your typical project. If somebody came in and just showed her a picture of a room with blank walls and they wanted her to help decorate it, I think that she could do that but ours was pretty hard."
RVPW is proud to provide quality work in the rogue valley to all customers and we will go the extra mile to make sure that you are happily satisfied! Specialize in soft wash/pressure wash, moss removal and gutter cleaning! No job too big or too small \nLook no further than RVPW and give us a call for a free quote.
"Service guy came as scheduled. Sent his "service" requirements to home base Home base calls back and lists, a very long list of what needs to be done and a very long list of what is not covered and what each item costs. The overall cost was outrageous and they weren't willing to give it to me in writing. Everything I had to pay for was overpriced, of course! They told me my other option would be to purchase my own water heater and they would reimburse me for what there water heater would cost, but no reimbursement for Labor, building permit, or any upgrades required by the local building department. The requirements of the building department were minimal. I went to Home Depot and had them do the installation and saved many hundreds of dollars. Lesson learned, have AHS do simpler repairs that don't require municipal building department approval. Have AHS pay for the equipment, and purchase installation from a trusted local installer."
We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.
"Colt and Josef were amazing to work with! They provided clear and concise quotes and were excellent communicators. They provided us a time frame of when the project would be done and weâ re able to accomplish it. There were times when things didnâ t go as smoothly as they had hoped, but they worked longer hours to make up for it. As far as the quality of the work, it was outstanding! We were very pleased on how our bedrooms turned out. We have hired them to do a complete remodel on our office, kitchen, dining room, living room and laundry room. We are looking forward to seeing the transformation from older modular to modern home!"
Brian Franklin Millett has been in the industry for more than 15 years. We are dedicated to customer satisfaction and take pride in every job we complete. We will work hard in a timely manner for you.
If you remove a load-bearing wall to create an entrance to a carport or covered patio, you can expect to pay between $3,200 and $9,500, with an average cost of $6,400. Factors such as the type of addition and if that area needs additional work will add to the price.
Removing a load-bearing wall affects the structural integrity of your home, so you’ll need a permit before starting the work. Building codes vary by municipality, and obtaining a permit and having the work inspected after completion will ensure you’re in compliance with all applicable regulations.
Building involves setting foundation posts, framing with durable wood, adding roofing support, and protecting from elements with water-resistant finishes.
Not all porch columns are load-bearing, though they can be. Some porch columns are simply decorative. There are ways to identify a load-bearing column, like looking for visible seams and a foundation. Also, check to see if the column directly enters the ground. In some porch installations, a contractor will excavate a hole to install a column into the earth along with a buried cement base for stability.
Most load-bearing walls are exterior, though they can also be interior.
The Powers, OR homeowners’ guide to carpentry services
From average costs to expert advice, get all the answers you need to get your job done.
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.
