Top-rated carpenters.

Get matched with top carpenters in Cave Junction, OR

Enter your zip and get matched with up to 5 pros

Need a pro for your carpentry project in Cave Junction, OR?

Select your specific project to find the pro for you.

Find Carpenters in Cave Junction

Avatar for Repair Solutions LLC
Repair Solutions LLC
5.0(
13
)

Serving Cave Junction, OR and surrounding areas

Approved

Super Service Award Winner

Free estimates

Small jobs welcome

Credit card accepted

Looking for Reliable Handyman Services? We've Got You Covered!\n\nAt Repair Solutions LLC, we’re a family-owned company with over 10 years of experience in delivering top-notch handyman services. Whether it’s fixing a leaky faucet, installing shelves, or tackling home improvement projects big and small, we do it all with care and precision.\n\nWhy choose us?\n\nExperience you can trust: Over a decade of satisfied customers!\nHonest & Dependable: We take pride in offering high-value services that deliver great results.\nAll types of home services: From repairs to renovations, we handle it with expertise.\nFamily-focused: As a family-owned business, we treat every job with the attention and respect it deserves.\nLet us help you make your home a better place.\n\nCall us today for a free estimate or to schedule your service.

Updated flooring / Interior Painting
Handymen Project
Updated flooring / Interior Painting
Handymen Project
Updated flooring / Interior Painting

+8

Response time1 day
3 neighbors recently requested a quote
Recommended by76%of homeowners
Avatar for Pacific Builders Tim Hogue
Pacific Builders Tim Hogue
3.7(
35
)

Serving Cave Junction, OR and surrounding areas

Approved

In business since 1992

Free estimates

Emergency services offered

"He hired, oversaw and was involved with very good contractors - electrical, flooring, cabinets, tiling, plumbing, painting and went the extra mile to make sure we were satisfied."
Coustom base board
Dewitt's project
Dewitt's project
Dewitt's project
stone fire place

+42

Response time7 hrs
Response rate85%
Recommended by92%of homeowners
Avatar for Nathan Henry
Nathan Henry
New to Angi

Serving Cave Junction, OR and surrounding areas

Approved

In business since 2019

Free estimates

Offers commercial services

Nathan Henry specializes in high-quality home repair and carpentry services for homeowners who value skilled workmanship and reliable results. Each project is approached with care, clear communication, and attention to detail, whether it’s a small repair or a more involved improvement. The focus is on doing the work correctly and cleanly—no shortcuts—so repairs last and your home is left better than it was found. Homeowners choose Nathan Henry for professional service, thoughtful execution, and work they can feel confident in.

1950's Stair Restoration
1950's Stair Restoration
1950's Stair Restoration
1950's Stair Restoration
New

+2

3 neighbors recently requested a quote
Avatar for Glc Carpentry & Construction llc
Glc Carpentry & Construction llc
5.0(
3
)

Serving Cave Junction, OR and surrounding areas

In business since 1994

Free estimates

Credit card accepted

We have the experience and dedication to bring your dreams to reality! We guarantee your satisfaction, and we won’t leave until the job is done right. Our team has quality experience in this industry, and we make sure our customers are happy before we leave. Call or click to schedule an estimate today!

Remodeling - General Project
shower remodel
shower remodel
shower remodel
Additional Photos

+27

Recommended by100%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Cave Junction, OR and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for Homemade Design
Homemade Design
3.7(
322
)

Serving Cave Junction, OR and surrounding areas

In business since 2006

Credit card accepted

"This service was exactly what I was looking for.  I wasn't confident about choosing the new look for my living room.  I wasn't sure what my "style" was, and what would look good together.  I needed a consultant to let me know if the items I was considering would look good together.  Amanda called me and we talked about what I liked/didnt like.  She had me post pictures from Pinterest and Houzz of rooms I liked.  From that she was able to tell me what my style was.  She noticed things I never realized before.  For example I apparently picked the exact style couch in every picture I posted.  As I found furniture I liked I would send her photos and she would let me know if she thought they would go good together.  For example she recomended a different coffee table - i needed one that was more substantial to balance the size of the sofa.  She also helped me fine-tune the paint colors for my walls - I thought this was the hardest part of designing the room, but I love the results. 
I was basically looking for someone to guide my choices, but they will also modify their level of service depending on what you need (cost varies depending on service needed).
I would positively use them again!!
"
Pennsylvania Master Bathroom
Boston Small Condo Kitchen
California Client Saves with HMD Designer Discounts
Recommended by54%of homeowners
...
Showing 1-10 of 64
Carpentry questions, answered by experts

When choosing a drywall anchor, consider the weight of the object you're hanging and how much weight the anchor will need to support. The heavier the weight, the stronger the anchor you'll need. You’ll find the weight capacity on the packaging when shopping for anchors. 

Also, remember that you can use more than one anchor when hanging something on the wall. If you're using multiple anchors, divide the object weight by the number of anchors to determine how much each will need to support. If you need help deciding which drywall anchor to use, you can hire a handyperson to hang your objects. 

Duration varies by project size, but average-sized homes typically take a weeks.

The cost to install a bow window can range from $1,500 to $15,000, with a national average of $3,900. The total price includes materials, which can cost between $1,200 and over $14,000, and labor, which typically adds $300 to $1,900. Several factors influence the final cost, including the window's size and frame material. For example, vinyl frames are the most budget-friendly option, while wood frames are more expensive. Custom features or energy-efficient upgrades will also increase the price. For comparison, a bay window installation typically costs between $1,000 and $7,000.

Bump-out additions can add some space to a closet without requiring any significant structural work. This entails pushing back the existing rear or side of the closet, simply moving the wall into either an adjacent room or unused space. For ground-floor closets, this could even be extended to the exterior of the home, but that has its own complications. Bump-outs are a good discussion to have with your contractor if you’re just looking to increase the space a little—not renovate the entire closet space.

The primary parts of a house that need framing during construction are floors, exterior walls, interior walls, and the roof. The framing in these areas provides the skeleton for adding other materials over the top. With walls, for example, contractors can hang drywall over the interior walls and siding over the outside of the exterior walls. Proper framing ensures a sturdy house that is built to last.

The Cave Junction, OR homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.