Top-rated masons.

Get matched with top masons in Mosier, OR

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Mosier, OR?

Select your specific project to find the pro for you.

Find Masons in Mosier

Avatar for Ram Jack West - Portland
Ram Jack West - Portland
4.7(
69
)
Concrete Foundation - RepairConcrete Foundation - Raise

Serving Mosier, OR and surrounding areas

Approved

In business since 2000

Free estimates

Emergency services offered

"Purchased a 1906 home in North Portland with an uneven foundation that had been patched for 60 years, but needed serious stabilization work. I contacted multiple foundation contractors in the greater-Portland area and Ram Jack was the only team that provided a full worse-case estimate that included everything that I may need to permanently stabilize the home's foundation. Other contractors' estimates were higher, omitted some of the features of Ram Jack's estimate, and involved greater excavation work around the home. While I was collecting estimates, I had multiple contractors check the levels on the house and could see the home was continuing to sink as much as half and inch in some areas within only a few months, so I knew I had to do something soon as the hotter summers are causing significant erosion to the clay soil in north portland. After paying the 50% down payment, I was quickly in touch with multiple project managers and structural engineers who were able to answer my questions as the work plan developed. I work from home and have two cats, so I was a bit worried about the noise and needing to leave at certain times during the work. Ramjack devised a plan of installing 12 helical piers from the basement and 2 outside for a small crawl space area as well as replacing most of the piers in the basement that had water damage. During the excavation and pier installation, I didn't have to leave my house at all, my cats were fine, none of the utilities ever needed to be turned off and none of the neighbors said they heard more than the hum of the generator outside; insane professionalism. The work team kept me informed at every step of the excavation and pier installation and was able to recover an inch of lift with only a few drywall cracks that I patched in a day. I could have gone further, but wanted to avoid any potential damage to the sewer pipes and stay within my budget. During the lifting, I was standing with the lead construction manager who kept me informed of every risk as we lifted the house bit by bit. During the excavation my basement looked insane with mounds of dirt everywhere, but the construction team cleaned everything flawlessly; all I had to do was a quick mop and the basement was good as new again. Overall had a great experience with RamJack; the 20 years in business shows, most everyone I dealt with had been working with them for years; the construction manager had been doing pier installation for 15 years. The work was expensive, but cheaper than the other local contractors, and certainly way cheaper than replacing the entire basement foundation. Ramjack was even able to take a few grand off the intitial worse-case estimate for solutions not needed. Glad I was able to repair my 120 year old home; here's to another 100 years. Big thanks to Pancho and Stephen, as well as the structural engineers and project managers; I'm very happy with the work."
Response time4 hrs
Response rate100%
4 neighbors recently requested a quote
Avatar for Elias Construction Services LLC
Elias Construction Services LLC
4.4(
9
)
Concrete Foundation - InstallRetaining Wall - Install

Serving Mosier, OR and surrounding areas

Approved

In business since 2008

Free estimates

Emergency services offered

"Elias Contruction provided a detailed estimate after inspecting the roof and making some qualified recommendations. The project required a few change orders that were not clarified in writing. I would recommend hiring Elias if you get changes in writing. They cleaned up pretty well although they missed a few things due to finishing in the dark. Overall satisfied with the job and cost was 60% of other bids due to sheathing adjustment."
After
IKO Cambridge Earthtone C
IKO Dual Grey Dynasty
3 Tab
3 Tab

+24

Response time1 day
Recommended by14%of homeowners
Avatar for Family Chimney Repair
Family Chimney Repair
4.9(
9
)
Brick or Stone - Tuck-pointingBrick or Stone - Tuckpointing - For BusinessBrick or Stone Siding: Install or Completely Replace+3 more

Serving Mosier, OR and surrounding areas

In business since 2022

Free estimates

Emergency services offered

"They were friendly, efficient and did a fantastic job on replacing/repairing our aging chimney. They replaced the flashing which was previously installed incorrectly. The new chimney cover works great and keeps the birds out. Excellent job on the clean up as well. Highly recommended."
Stonework
Preparing the reline sealing
Stonework exterior fireplace.
Family Chimney Repair in THE DALLES, Oregon. Chimney Rebuild.
Fireplace Backwall Rebuild in Portland, Oregon. Family Chimney Repair.

+38

Recommended by75%of homeowners
Bedrock Masonry and Construction
5.0(
1
)
Brick and Stone Flatwork - RepairBrick or Stone - Tuck-pointingBrick or Stone Siding: Install or Completely Replace+4 more

Serving Mosier, OR and surrounding areas

In business since 2011

Free estimates

We are dedicated to providing our clients with the very best in installation and repair for your concrete and masonry needs. With years of industry experience, we specialize in a variety of residential and commercial brick, stone and concrete work. We take pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.

Front Patio
Driveway
Response time3 days
Recommended by100%of homeowners
Showing 1-10 of 31
Masonry questions, answered by experts

Yes, brick can breathe through limewash. Limewash is a breathable coating made from natural lime and water, allowing moisture to pass through while providing a protective layer. Unlike synthetic paints or sealants, which can trap moisture within the brick and lead to issues like mold, limewash allows the brick to maintain its natural breathability. This characteristic makes limewash an ideal choice for historic structures where preserving the integrity of the brick is essential.

Cobblestone can be made from many different types of stones but the most common ones, by far, are granite, basalt, limestone, and sandstone.  If you are laying a brick paver patio or other such project, the medium is different. It’s rare, but cobblestone can also be made from marble, slate, jasper, and other types of rock. Technically, you can make cobblestone from almost any type of rock, but if it is weather-resistant and stands the test of time is another question entirely.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

The white stains you see on your bricks are likely efflorescence, which is salt and lime buildup. To remove efflorescence stains, simply brush them away with a stiff brush. For larger, more stubborn stains, scrub the stains with a water-detergent solution.

Drilling into brick or mortar requires the use of a masonry drill bit. Masonry drill bits appear similar to standard drill bits except for the leading tip of the bit. The tip has a bulky carbide arrow-shaped end slightly larger than the rest of the bit shaft. Standard or high-speed drill bits designed for making holes in wood or metal don’t have the ruggedness or design shape you need to drill into brick. They may not go through the brick at all, and if they do, they’re more likely to overheat, crack, or dull before you finish drilling.

The Mosier, OR homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.