Get matched with top countertop and backsplash pros in Drummond, OK

Learning how to clean different types of countertops can help them look new for longer. Use a gentle cleaner on recycled glass countertops to avoid damaging the binding agent. Avoid harsh or abrasive chemical cleaners, which can damage the surface and shorten its lifespan. It’s also best to keep acidic cleaners away from countertops that use a concrete binding agent, as they can stain the surface, leaving it looking dirty and drab.

If you have light renovation experience, you should be able to build your own countertop made from wood or laminate. These tend to be the most DIY-friendly materials, but you’ll need to be comfortable using a circular saw and taking precise measurements. When it comes to installation, leave anything that involves plumbing, electricity, or gas lines to the pros.

If you are building a laminate countertop from scratch, instead of buying premade laminate countertops, you can use particle board underneath the laminate. You will need to use a sheet of particle board for the substrate, along with four-inch strips underneath the edges. For proper installation, make sure that any seams are level and use a sander as necessary before installing the laminate.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.