Get matched with top interior painters in Cushing, OK

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

You can apply waterproofing over paint, but you won't get as much protection as you would if you painted the surface with a waterproof paint from the get-go. Not all waterproofing methods are compatible with painted surfaces, and they may not adhere well. This is especially true if the paint is glossy, old, or flaking. Waterproofing sealers are primarily meant to be applied to porous surfaces, like concrete, wood, or brick. 

To fix bubbling paint, scrape away any loose or blistered areas using a putty knife. Lightly sand the surface to smooth out rough edges and create a level finish. Clean the area thoroughly to remove dust, dirt, and any residue. Once the surface is clean and dry, apply a quality primer suited to the material you're painting. Finally, repaint the area, making sure to work in proper temperature and humidity conditions to prevent new bubbles from forming.

You can sell a house with lead paint, but there are several requirements. If you are aware that lead paint exists anywhere in the home, you must disclose that to potential buyers. Required home inspections will often uncover lead paint, especially for older houses where lead paint may still be a problem. If you have taken steps to encapsulate lead, you should provide buyers with full documentation of the project so it won’t cause any problems later on.