Get matched with top tv mount installation pros in Kenton, OH

Fire and electronics typically don't mix, but that doesn't mean you can't mount your TV on a brick fireplace. However, you should proceed with caution. If you do not use your fireplace regularly, you can be assured that your TV will remain undamaged. However, if you do take advantage of it, be aware that hot air, containing soot, will travel upwards. Even with the flue fully open, the temperature above the fireplace can still get very high.

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.

The shorter the coaxial cable, the better. The further you run the cable, the more signal loss you'll experience. At 50 feet, you'll see significant signal loss, and by 100 feet, you'll experience at least a 30% drop in signal strength.

If you don’t have studs in the area where you want to install your TV mount, you may still be able to install a TV mount on drywall. The easiest way to install a mount on drywall is by using drywall anchors—but not just any plastic anchors. Choose molly bolts or toggle anchors, which have a weight capacity of around 50 pounds. For added support, consider pairing drywall anchors with a wall mounting plate. Extra heavy TVs may need to be mounted via the ceiling joists or beams.