Best door pros near Glen Willow, OH

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Most slab doors do not have hinge cutouts, making them a complete blank slate. You will have to measure and cut the mortises yourself. You can order a slab door from a home improvement store and ask them to make the cuts, although you still have to take the measurements independently.

Most of the time, a squeaky door is the result of dry hinges, where metal parts rub together without enough lubrication. Dirt, dust, or rust can also build up inside the hinge and add to the friction. Loose screws or slight misalignment can shift things just enough to create that irritating squeaking noise. Worn-out hinges or swelling wood from humidity changes can also be part of the problem on older doors. A good cleaning and proper lubrication usually take care of it, but if the squeak sticks around, it’s worth checking for bigger issues with the hinges or alignment. 

Most modern door knobs will all fit in standard, modern doors, so if you know your door was made in the last 50 years or so, you should be fine buying a standard replacement door knob. The only exception would be a thumb latch handleset for an exterior door, as this type of door knob may not fit your door without drilling a mounting hole for the bottom of the handle. Antique or custom doors might also have different sizes and knob mounting holes, so call in a professional if you don’t believe your door is a standard one.