Get matched with top electricians in Deer Park, OH

If you have a lamp that flickers or doesn’t stay on, it’s a sign that it’s time to rewire it. Additionally, it’s important to rewire antique lamps so they’re safe to continue using without the risk of an electrical fire. If the plug on your lamp is more than 15 years old or you notice poor performance like flickering, you should hire a lamp repair service to rewire it. If you’re upgrading the bulbs in an antique lamp from incandescent to LED or CFL bulbs, rewire it so it’s compatible with the modern bulbs.

While circuit breakers are designed to be reset after tripping, there isn't a strict countdown to when they will fail. The primary danger lies in a breaker tripping multiple times in a short period without allowing the components to cool down. Theoretically, a standard breaker might handle around 50 trips caused by simple overloading. However, this number can be much lower in practice. For instance, a high-current fault could damage a breaker to the point that it needs replacement after only two resets. Repeatedly resetting a breaker that trips frequently exacerbates the underlying problem by causing the electrical components, wires, and the breaker itself to overheat. This can lead to permanent damage, cause the breaker to trip unnecessarily in the future, and increase the risk of an electrical fire. If a breaker trips every few minutes, you should leave it in the 'off' position and call a qualified electrician for an inspection.

If you have a garage heater that is 1,500 watts or more, it will need its own breaker. As a good rule of thumb, no appliance should exceed 1,500 watts per outlet for best outcomes. Consult a local garage heating service to determine the power needs for your outdoor or indoor space.

No, you should never plug a generator directly into a wall outlet in your house. This practice is extremely dangerous, often illegal, and can cause "back-feeding," where power from the generator flows back into utility lines, creating a life-threatening hazard for utility workers. It can also damage your home's electrical system, including appliances like pumps and HVAC fans. If the main power is restored while the generator is connected, it can destroy the generator and cause an electrical fire. To safely connect a generator, you must use a professionally installed transfer switch or an interlocking kit, which prevents back-feeding by disconnecting your home from the utility grid before the generator provides power.