Get matched with top roofers in Castalia, OH

The lifespan of a torch down roof depends on the number of layers installed. A single-ply system typically lasts between 10 and 15 years, while a multi-layer system with two or three layers can last from 15 to 25 years. Although a multi-layer option may be more expensive upfront, it provides a longer service life. Warranties often reflect this, with about 12 years for a one-ply system and 15 years for a two-ply system. For context, this lifespan is shorter than other common roofing materials like wood or asphalt shingles, which typically last 20 to 30 years, with high-quality versions lasting up to 50 years.

More and more insurance companies are writing torch down applications out of their liability insurance for contractors. If torch down is covered, they generally require a worker to stay on site for two hours after the last flame is extinguished.

For this reason, cold application modified bitumen—also known as “peel and stick”—is becoming more popular, and torch down is decreasing in popularity. Modified bitumen is taking its place, as it uses both hot and cold applications.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

During the framing process, builders connect the roof to the walls with materials, including metal connectors, plywood panels, and wood blocks. These roof-to-wall connections are important and provide weatherproofing, noise and temperature insulation, protection against pests, and home integrity. The type of connector and method used will vary, depending on your home’s construction and needs, and each has pros and cons in terms of cost, noise insulation, longevity, and reliability. Talk with your home or roofing contractor about the best connectors for your roof and walls, and what they recommend for your home.