"Stu and his team did an excellent job. They were very professional and quickly, efficiently and cleanly put new blown insulation on the attic floor of my old house. He also explained clearly how the insulation works, the R values and benefits. Thank you Discount Insulation."
"More often than not, contractors are nightmares. By contrast, Foamco is a dream. Although they're based over 40 miles away, they came up promptly to view my attic and provide a quote to insulate it with open cell foam. The price was perfect. Any less and I would have been suspicious. Any more and I couldn't have afforded the work. In addition to the price, calculated before the principal left my driveway, they answered a variety fo technical questions about alternative approaches, clarified what condition I had to have the space in for the quote to apply, and assured me it would be a complete job. Three weeks later, they arrived as scheduled to an attic stripped of obstructions and old ceiling components. The crew of two proceeded to insulate the entire roof, which has tall peaks, two dormers, deep eaves, high gables, and two large semi-obstructed openings into an adjacent cold attic. By 3PM every surface exposed to the exterior was fully foamed and cut back to the rafter surface, ready for sheetrocking. They sealed the irregular openings into the annex with foamed cardboard panels (one of which is removable for access). It was an amazing one day transformation. I now have a warm, cozy, usable attic instead of a giant heat radiator. I'm pretty sure the job will pay back in about three years, without even accounting for the added usable space. I cannot recommend Foamco highly enough as a contractor that does what they promise and then some. I would absolutely not want to do that work and I admire the employees, Jay and Pablo, for their dedication under very unpleasant conditions. This is the second vendor I've chosen from Angie's List, and both experiences have been very gratifying. One warning, the scope of building codes have has now been extended into anything that affects the building envelope, so with the Foamco rig parked rather obviously in front of the house for less than 3 hours, I got an authoritative knock on the door from the town building inspector, flashing his badge and telling me I needed a permit for insulation. Fortunately, I was totally believable when i told him i had no inkling that such work needed a permit, so he let me pay for it without penalty. Beware the authorities. In my case, foam with a fire spread rating of 25 or less does not require sheetrock or other flame retardant covering. "
"I contacted Fausto from Tigasi Insulation to discuss a project in my basement. He arrived on time, and from the beginning, I could tell that he was a professional who takes pride in his work. At the end of the job, Fausto personally asked me to inspect the work that had been completed. I was very impressed with the quality of his work and the excellent job he did. I highly recommend Fausto and Tigasi Insulation to anyone looking for professional and reliable service. Thank you, Fausto, for the great work!"
"I recently had the pleasure of working with Energy Evolution for a spray foam insulation job, and I couldn’t be more impressed. Their main technician Cristian, was professional, knowledgeable, and incredibly thorough from start to finish. He took the time to explain the process, answered all my questions, and made sure every detail was handled with precision.
If you’re looking for someone who is reliable, skilled, and committed to doing top-notch work, I highly recommend them. Thank you for a job exceptionally well done!"
"I'm a General Contractor (Jon Beer Contracting is my company) and recently worked with Corey and his team from Prestige Energy Solutions. We are doing a combination of a gut renovation and a new build on my own personal home that had a lot of tricky details and moving parts. From start to finish his team was professional, attentive, clean and skilled. I wouldn't hesitate to hire him for our future insulation needs."
ProSeal Foam LLC specializes in professional spray foam insulation for residential and commercial properties throughout the Hudson Valley and surrounding areas. We provide both open-cell and closed-cell spray foam solutions for new construction, renovations, additions, attics, walls, basements, crawl spaces, garages and more.
\n
\nOur goal is to create a tighter, more energy-efficient building envelope that helps reduce air leakage, improve indoor comfort, control moisture and reduce the workload on heating and cooling systems.
\n
\nWith extensive construction experience, we understand how a building works as a complete system?not just how to spray insulation. We take pride in clean, professional installations, attention to detail and providing the right insulation solution for each project.
\n
\nWhether you?re a homeowner, builder or contractor, ProSeal Foam LLC is ready to handle projects of all sizes. Contact us today for a consultation and estimate.
"Iâ ve been doing business with Super seal insulation for more then 15 years, they are absolutely Professional, Quality and on top of all the have excellent customer service."
Applying plaster to a wall will usually cost between $2 and $10per square foot for both the material and labor. The cost will vary based on the quality of the plaster you’re using and whether or not prep work is required before the work begins. Wall prep can add up to about 10% to your total costs. Plastering exterior walls can be more expensive in many cases because they are taller and require scaffolding and safety equipment.
Fixing ceiling nail pops involves similar steps to wall repair, with the major difference being the orientation of the work. Ceiling nail pops can be more challenging because you may need to work overhead, which can be physically demanding and require additional safety precautions. Additionally, the ceiling may have different materials or finishes, such as textured surfaces, which can affect the repair process. Otherwise, the fundamental steps are the same.
All plaster walls will crack over time due to normal house settling and expansion and contraction from temperature and moisture changes. Small, thin hairline cracks are generally not serious and are mostly a cosmetic issue. However, larger or more significant cracks can indicate structural problems.
Here's how to tell the difference:
Cosmetic Cracks: Cracks that are 0.5 cm (0.2 inches) or thinner are typically cosmetic.
Structural Cracks: Cracks wider than 0.5 cm, excessive or deep cracks, multiple cracks in the same area, or cracks that span around corners can signify a structural or foundation issue. Cracks along the joints where walls meet the ceiling also warrant attention.
For cracks wider than 0.5 cm, structural repair is needed. If a crack is 2.5 cm (1 inch) or wider, or if you notice any signs of a structural problem, it is best to contact a plaster repair professional to assess the damage.
When sanding drywall mud, you’re going to create a very fine dust that may contain silica. Silica dust contains crystalline silica, which can cause long-term illnesses for people who inhale it in significant quantities. Wear a mask while sanding drywall. Then dampen a drywall sponge to wipe the dust off the drywall, helping to reduce the amount of dust that may become airborne.
Furring strips, thin strips of wood or metal, are not always required for ceiling drywall installation. If the ceiling surface is even and in good condition, drywall can be directly attached to the ceiling joists using screws. However, furring strips become essential when dealing with irregular surfaces or when additional insulation or soundproofing is needed. They create a level substrate for attaching the drywall. Ultimately, the decision to use furring strips depends on the condition of the existing ceiling and the specific requirements of the project.
The Tallman, NY homeowners’ guide to drywall insulation services
From average costs to expert advice, get all the answers you need to get your job done.
New insulation makes your home more comfortable and boosts energy efficiency. Use this guide to budget for insulation installation costs in New York, NY.
The cost of blown-in insulation in New York, NY varies depending on the type of insulation, labor, prep work, and more. Learn more about the cost factors in this guide.
Insulating your attic can improve your home’s efficiency and reduce electric bills. Use this guide to find out what attic insulation will cost you in New York, NY.
Learning how to insulate plaster walls can help improve your home's energy efficiency. However, there are crucial cautions to consider before attempting.
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.
Insulating your walls requires the right insulation and installation method. Keep reading to learn how to insulate a wall without removing the drywall.