"I wanted to get my attic insulated. First, I reviewed what materials would be best to use, what a quality inspection of the work to be done should consist of, estimates for the work to be done. Then I obtained three proposals for the jobs. One was ridiculously high. The lowest was based on a cursory inspection and accompanied by legalese language mentioning that the initially quoted price was subject to change, that a lien could be placed on the property, etc. I selected JJ&Kâ s proposal. It was based on a thorough inspection, and the price was in line with my expectations. Alfredo Oleasâ team was professional and courteous. They did what I would consider a quality job. They followed required safety precautions and cleaned up after the work. Alfredo was a pleasure to work with, and I highly recommend his company."
"As a retired contractor I can say that these guys do it right. Estimator/salesman (Jay) arrived right on time for his appointment and sent an estimate by email within about twelve hours. Calls were returned, questions answered and proposal was clear and to the point. Appointment was scheduled with no difficulty and the crew - two very tidy men - arrived a few minutes early for the installation. (Jake and a name I did not catch) The job consisted of spraying a confined attic area which contains an air handler and the box beam around the cellar foundation. This was all done cleanly and within a few of hours. Drop clothes were placed every where necessary and the floors were covered more than adequately. When they left, other than the work they had done, I would not have known they had been here.
This was a retrofit to stop heat leakage from the attic area which contains the air handler and which was causing enormous icicles over the front entrance and cold infiltration from the cellar. This was something of an experiment to see what difference the insulation will make this winter. They have other insulation services and I will be calling them to price a couple of other projects as time and cash flow allow. Keep in mind, spray foam is lumpy. It does not present a flat surface when finished and no one should expect it to disappear into the background unless it is behind sheetrock. That is another kind of installation.
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction, from the start to the completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
"“I recently had insulation work done in my house, and the experience was fantastic. The team was fast, professional, and efficient. I can definitely feel the difference in the comfort and temperature of my home. Highly recommend their service"
At our company, we are committed to reliability, clear communication, integrity, and top-quality workmanship. With expertise in energy auditing, air sealing, and insulation, we specialize in spray foam and blown-in insulation solutions. Our goal is not only to deliver exceptional results but also to ensure you remain well-informed throughout your project. We look forward to the opportunity to earn your trust and business!
"Iâ ve been doing business with Super seal insulation for more then 15 years, they are absolutely Professional, Quality and on top of all the have excellent customer service."
"Quartz Insulation, Inc team installed foam insulation in our attic. They were professional, effective, and a pleasure to work with. I highly recommend this company for your attic insulation or similar work."
"Comprehensive estimate, especially compared to another estimate that I got which was cheaper. I ended up getting our house insulated with MetroNY given how detailed and the time and effort spent on giving me the right estimate for the job. The insulation was professional and the manager, Billy, was super polite and took extra time to understand what was going on in between the walls and floors. We now have the added benefit that the noise from the train that runs through our back yard is muffled thanks to the insulation. We await the cold of the winter to see if it worked. Antoinette"
You’ll get better results if you soundproof the whole wall. A hole through which light can pass can also let sound waves in. Acoustical or silicone sealant applied to holes and cracks can block enough sound to make a difference. However, the more layers absorb vibrations and slow or stop sound waves, the less noise you’ll have.
You should do a little bit of sanding between adding coats of mud. Knock down any ridges or significantly imperfect areas through sanding, which should help you apply the next coat of mud smoothly. If your first coat of mud is pretty smooth after it dries, a quick sanding is all you’ll need. Don’t forget to wipe away any dust after each sanding process.
Plaster can be a difficult DIY to master, especially if you plan to plaster an entire room, rather than patch a small area. Before you begin a plaster DIY project, you need to know which tools and type of plaster to use. It's also important to know how to prepare the surface and apply the plaster for a smooth finish. If that all sounds like a lot of work, you may prefer hiring a local plaster repair contractor to do the job.
Although they have similar applications, spackle and joint compound are not the same. Their primary differences lie in their composition, consistency, and ideal use cases.
Spackle is composed of gypsum and binding agents, making it thicker than joint compound. It dries quickly and is easy to sand, which makes it ideal for small wall repair projects like filling nail holes or patching minor damage.
Joint compound, also known as drywall mud, consists of limestone and gypsum. It is primarily used for large-scale projects, such as taping and finishing the seams on newly installed drywall. It tends to shrink more than spackle and can be more difficult to spread.
While both products can be used to fill small depressions and cracks, spackle cannot replace joint compound for taping and mudding new drywall. Conversely, you can often use joint compound for small patching jobs typically done with spackle.
In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.
The Spring Valley, NY homeowners’ guide to drywall insulation services
From average costs to expert advice, get all the answers you need to get your job done.
New insulation makes your home more comfortable and boosts energy efficiency. Use this guide to budget for insulation installation costs in New York, NY.
Insulating your attic can improve your home’s efficiency and reduce electric bills. Use this guide to find out what attic insulation will cost you in New York, NY.
The cost of blown-in insulation in New York, NY varies depending on the type of insulation, labor, prep work, and more. Learn more about the cost factors in this guide.
Learning how to insulate plaster walls can help improve your home's energy efficiency. However, there are crucial cautions to consider before attempting.
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.
Insulating your walls requires the right insulation and installation method. Keep reading to learn how to insulate a wall without removing the drywall.
