Get matched with top fireplace pros in Parish, NY

Single-pane windows might let in the cold, but if you’re not ready for a long-term solution or window replacement, there are quick fixes to keep your space warmer. Start by sealing gaps with weatherstripping or caulking around the frame to block drafts. For an extra barrier, apply window insulation film to the glass, trapping an air pocket between the film and the window. Thick curtains or thermal drapes can also help keep the chill at bay. And if you’re in a pinch and looking to get creative, bubble wrap can provide a surprisingly effective layer of insulation—just spritz the window with water and press it on, bubble side in.

The answer can vary widely based on a home's age and design. As with any type of remodeling project, assume that every structure is load-bearing until confirming otherwise with a structural engineer. Almost all modern homes have chimneys that are fully independent from the rest of the home's framing. As a result, they don't bear any load beyond their own weight. However, many historic homes built prior to the 1900s contain load-bearing chimneys that tie into the surrounding roof and floor joists. If possible, use a home's blueprints or look for chimney connections that indicate load-bearing qualities to get your answer.

You can close up a chimney instead of demolishing it. Homeowners often go this route because the cost of removing a chimney, especially a structurally important chimney, can be expensive.

Properly closing up a chimney involves closing and sealing the damper, installing a chimney cap damper, and sealing the fireplace opening with a door or bricks. The cost to seal and cap a chimney is around $500 to $650—significantly less than the average chimney removal cost.

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.