Best countertop and backsplash pros near Manlius, NY

You can cut countertops without chipping by using your saw correctly and having a new fine-toothed blade. You can also put masking tape on the front of the countertop material across the cut line and cut from front to back. However, it is very hard to cut countertops without chipping them, especially if they are made of stone or more fragile materials like laminate. The best advice is to know how to use the equipment, use the correct cutting method for the material, cut from back to front, move slowly, and practice on scrap material first.

Yes, onyx is more expensive than granite. Its higher cost is due to its rarity, delicate nature, and the specialized care it requires. While granite countertops typically cost between $2,000 and $4,000, onyx is considered a premium material. Its luxurious, translucent appearance and unique ability to be backlit also contribute to the higher price. In terms of durability, granite is a hard, durable surface, whereas onyx is more delicate and can be damaged if not handled carefully.

No, you should not put hot pots or pans directly on epoxy countertops, as this can cause permanent damage. While epoxy is heat-resistant, it is not fully heatproof. Epoxy countertops can typically withstand temperatures ranging from 135°F to 300°F, but cookware directly from a stove or oven can reach much higher temperatures (300°F to 500°F). Placing an extremely hot item on the surface can cause it to melt, soften, or discolor. To protect the integrity and appearance of your countertops, always use a trivet, hot pad, pot holder, or other heat-resistant barrier before setting down hot cookware.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.