Get matched with top siding pros in Manlius, NY

You should restain or refinish your home's cedar siding every three to seven years to maintain its appearance and ensure maximum protection. The precise frequency depends on several factors, including your local climate, the siding's exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the condition of the wood.

Homeowners in harsh climates with high humidity and significant direct sunlight should plan on restaining every three years, while those in milder locations can wait up to seven years. For the longest-lasting protection in particularly harsh environments, consider using an opaque stain.

If you're looking for a lower-maintenance alternative, vinyl or aluminum siding are options to consider. Although their installation cost may be higher, they don't require as much upkeep over time, which can provide more value, especially in areas with excessive rainfall or high humidity.

Some homeowners use caulk on the edges of clapboard siding to help seal it. However, this method invites new problems. With so many gaps sealed, clapboard siding is often unable to drain properly and moisture from rain or other sources can build up inside. This can lead to rot and other issues over time. When repairing clapboards, it’s best to avoid caulking the final product. The exception is trim around windows and doors, which should be caulked to avoid moisture problems.

Traditional clapboard siding, particularly with panels made from wood, is not a significant insulator on its own. However, you can keep your home cooler in summer and warmer with "insulated clapboard siding," which is a type of vinyl clapboard siding with a built-in foam insulation. Consult a local siding contractor to determine whether insulated siding is right for your home.

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.