Get matched with top roofers in Levittown, NY

The number of roof vents necessary for a 2,000-square-foot house depends on several factors. The calculation depends on the net free area within the attic and whether your municipality requires a 1/150 or a 1/300 ratio of venting square feet to attic square feet. If you install vents with a square-foot opening of one, you'll need either 14 or seven exhaust vents and an equal square-foot amount of intake vents.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

A roof pitch that’s too shallow won’t shed runoff as quickly, so you have an increased risk of water intrusion through the seams between your roofing materials. In colder climates, snow and ice will accumulate more easily on your roof, which can add enough weight to cause roof collapse and structural damage to your home.

EPDM roofing is a single-ply roofing material made of rubber, and a professional will install it in a single sheet and seal the seams. Built-up roofing (BUR) consists of multiple layers made from asphalt, adhesives, and roofing felt. A professional will construct the layers of BUR on-site. EPDM is easier to repair and has better resistance to extreme temperatures, while BUR is more fire-resistant and affordable.