Get matched with top roofers in Wantagh, NY

The lifespan of a torch down roof depends on the number of layers installed. A single-ply system typically lasts between 10 and 15 years, while a multi-layer system with two or three layers can last from 15 to 25 years. Although a multi-layer option may be more expensive upfront, it provides a longer service life. Warranties often reflect this, with about 12 years for a one-ply system and 15 years for a two-ply system. For context, this lifespan is shorter than other common roofing materials like wood or asphalt shingles, which typically last 20 to 30 years, with high-quality versions lasting up to 50 years.

Yes, a roof blister can cause a leak if it gets to the point where it pops. Prior to popping, a roof blister is just an aesthetic issue, but once it pops, you’re left with a small hole in the shingle. Water from rain and snow can easily get inside this hole and interact with your underlayment, roof decking, and the building material below.

Metal roofs do not inherently leak more than shingle roofs; when properly installed, they are generally less likely to leak. Asphalt shingle roofs are more susceptible to leaks due to factors like wind uplift, damage from extreme weather, moss growth, and ice dams. Over time, asphalt shingles also lose their protective grit, which reduces their waterproofing capabilities. In contrast, metal is a more resilient material that stands up better to heavy precipitation and high winds. However, metal roofs can develop leaks if they are poorly installed, have improperly sealed fasteners, or experience issues from thermal expansion. For this reason, professional installation and regular maintenance are crucial to ensure a metal roof's longevity and superior protection against leaks.

Flapping shingles, or shingles that are lifting or curling away from your roof, can be glued back into place using roofing cement or sealant. Apply the glue underneath the shingle, then press it down firmly. You can leave a brick on top of the shingle to hold it in place overnight while the sealant dries.