Should you sand your fence before staining?

• <div><p>On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.</p></div>

How much does a five-gallon bucket of stain cover?

• <div><p>A five-gallon bucket of deck stain will cover roughly 875 square feet in a single coat. Actual coverage will vary based on the type of wood you’re staining and the number of coats. If you plan on doing multiple coats, multiply the square footage by the number of coats to calculate how many buckets of stain you’ll need.</p></div>

Get matched with top fence painters in Sanostee, NM

Q: Should I stain or seal my cedar deck or fence?

• <div><p>Yes, staining or sealing a cedar deck or fence is highly recommended to extend its lifespan, typically by five to 10 years. While cedar is naturally resistant to mold and mildew, it can still fall victim to moisture, sun exposure, and rot over time. Applying a treatment creates a protective shield that helps prevent splintering, fading, and decay, preserving the wood's strength and appearance. A combination stain and sealer often provides the best protection, as it soaks into the wood grain rather than just sitting on top. This offers superior defense against UV damage and rot and lasts longer than a sealer alone. To maintain the wood's natural look, consider using a near-translucent stain. You should plan to reapply the stain or sealer every two to three years.</p></div>

Q: Is it easier to edge wet or dry?

• <div><p>A dry lawn is easier to edge than a wet one. When your ground is wet, your blades will likely clump together, making a seemingly even cut while wet, but an uneven disaster when dried. Also, a wet lawn can impact your blade's performance and cause mud to kick up, resulting in a messy finish.</p></div>

Q: How many coats of stain are needed for a fence?

• <div><p>Typically, a fence requires one to two coats of stain. The exact number can vary depending on the porosity of the wood. For specific guidance, it's best to check the manufacturer's instructions. After applying the first coat and letting it dry completely, you can assess the finish. If it appears patchy, uneven, or you want a more saturated color, a second coat is recommended. An extra coat can also help cover lap marks.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your fence painting project in Sanostee, NM?

Select your specific project to find the pro for you.

Verified Reviews for Fence Painting pros in Sanostee, NM

*The Angi rating for Fence Painting companies in Sanostee, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Fence Painting needs.

*The HomeAdvisor rating for Fence Painting companies in Sanostee, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Fence Painting needs.

Last update on January 10, 2024

Reviewed in January 2024
Work done in a timely and professional manner
S & T Renovations
Request a quote
Reviewed in April 2023
Very professional and experienced. Work was completed at a reasonable time frame without sacrificing quality.
Jays Complete Flooring
Request a quote
Reviewed in December 2018
Thomas was thorough in checking for leaks. He was kind, friendly and told me what he was doing. Even though there was no leak from the washer he found where the water was coming from and made recommendations.
Elevated Frequencies Repair, LLC
Request a quote
Reviewed in October 2018
Only problem with this company was they were 25 minutes late for scheduled 8 a.m. appointment. Work was done satisfactorily. Could have been a little more careful hooking up their equipment and dragging hoses around the home. Estimate was accurate with no surprises on final billing. Domingo and...
Coit Cleaning Services
Request a quote
Reviewed in April 2015
It went very well. Chad Waite the provider, was prompt, courteous, and very professional. <br />
M & R Plumbing Service
Request a quote

Find Fence painters in Sanostee

No results for Fence painter in

Try adjusting your search criteria.

Fence Painting questions, answered by experts

Yes, staining or sealing a cedar deck or fence is highly recommended to extend its lifespan, typically by five to 10 years. While cedar is naturally resistant to mold and mildew, it can still fall victim to moisture, sun exposure, and rot over time. Applying a treatment creates a protective shield that helps prevent splintering, fading, and decay, preserving the wood's strength and appearance. A combination stain and sealer often provides the best protection, as it soaks into the wood grain rather than just sitting on top. This offers superior defense against UV damage and rot and lasts longer than a sealer alone. To maintain the wood's natural look, consider using a near-translucent stain. You should plan to reapply the stain or sealer every two to three years.

On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.

A dry lawn is easier to edge than a wet one. When your ground is wet, your blades will likely clump together, making a seemingly even cut while wet, but an uneven disaster when dried. Also, a wet lawn can impact your blade's performance and cause mud to kick up, resulting in a messy finish.

A five-gallon bucket of deck stain will cover roughly 875 square feet in a single coat. Actual coverage will vary based on the type of wood you’re staining and the number of coats. If you plan on doing multiple coats, multiply the square footage by the number of coats to calculate how many buckets of stain you’ll need.

Typically, a fence requires one to two coats of stain. The exact number can vary depending on the porosity of the wood. For specific guidance, it's best to check the manufacturer's instructions. After applying the first coat and letting it dry completely, you can assess the finish. If it appears patchy, uneven, or you want a more saturated color, a second coat is recommended. An extra coat can also help cover lap marks.

The Sanostee, NM homeowners’ guide to fence painting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deane Biermeier
•
Jul 10, 2026Jul 10, 2026
How Much Does Fence Painting Cost? [2026 Data]
Looking to give your fence a refresh? This guide explores the cost to stain a fence—and the cost to paint it, too— so you can budget for your project.
Timothy Moore
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Stain a Fence? [2026 Data]
Staining a fence is a great project if you’re a handy DIYer. Learn how much it costs to stain a fence and how you can influence the price.
Michelle Nati
•
May 30, 2026May 30, 2026
How Much Does a Hog Wire Fence Cost? [2026 Data]
This guide breaks down hog wire fence cost factors to help you budget for a rustic, trendy fence style at an affordable price.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Fence Painting
Wondering who to hire to paint fences or who to call for fence painting? Explore pro options, the process, and what to expect before you book.
Gemma Johnstone
•
Apr 8, 2026Apr 8, 2026
9 Best Fence Paint Colors for Your Yard
Deciding on the best fence paint color is difficult. This guide will help you choose a shade that creates the right vibe alongside your house color and landscaping.
Scott Dylan Westerlund
•
Jul 9, 2026Jul 9, 2026
How to Paint a Chain Link Fence in 3 Steps
Increase your curb appeal by taking your chain link fence from dull to bold with fresh paint. Here’s how to paint a chain link fence to keep it looking great.